Farm Equipment - R62 question,t

Print Page | Close Window

R62 question,t

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=143527
Printed Date: 31 Mar 2026 at 6:25pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: R62 question,t

Posted By: JPG AUSTRALIA
Subject: R62 question,t
Date Posted: 17 Oct 2017 at 12:01am

Replacing the pins and bushes on the rotor variator sheaves,last time i did this the bushes were a snug fit on the 1inch pins. The bushes i got with the new pins now measure 1,1/16 and are avery sloppy fit ,what gives ,is this a new change for more clearance?. This is a second harvester i bought last year and the first thing i noticed was the slop in the pins, so i thought "that needs fixing". The new ones look the same! Anyone come across this? Mydealer knows nothing , and neither does the top mechanic there.

Replies:

Posted By: JPG AUSTRALIA
Date Posted: 17 Oct 2017 at 3:58am

The part numbers are 71370210 and 71370209

Posted By: SteveM C/IL
Date Posted: 17 Oct 2017 at 9:01am

don't know but snug fit don't sound good.What keeps it from binding? Pond on various variables on my F2 are loose fit new.The load is just on one side of bushings. Would be more concerned about worn pins than loose fit.