Construction and other equipment

Print Page | Close Window

Allis 653 Dozer.

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=143018
Printed Date: 13 Aug 2025 at 7:52pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis 653 Dozer.

Posted By: AndyT
Subject: Allis 653 Dozer.
Date Posted: 01 Oct 2017 at 8:45am

Will a 433 from a F2 Gleaner fit in a 653 Dozer?

Replies:

Posted By: Craig/insoh
Date Posted: 01 Oct 2017 at 11:30am

Yes same engine but the driveline will not hold up for that many horsepower! I would advise taking turbo off and setting pump and injectors to 650 series specs! Driveline parts are starting to be hard to find!

Posted By: Coke-in-MN
Date Posted: 01 Oct 2017 at 12:23pm

AC 2200 engine used in that series of machine was what i thought was used - was talking with a mechanic who did some work on that and said same engine was used in cotton pickers but with turbo and could be boosted to 85 HP or so .
Question is the rest of machine from clutch-pack to single reduction finals are not made for that power .
If you want a 70 HP or higher machine look for something made for the job
After having a HD4 and doing work on both rear cases , replacing gears, replacing axles, having cases machined after outboard axle bearings failed and ate into case webbing - the machines are industrial machines - NOT construction or excavation grade machines - the HD4 went down the road running as I got tired or repairing it , kept my HD5G , in fact the HD5B lasted a couple more years until replaced with a FIAT/ALLIS FD5 - 70+ HP machine with 6 way blade

-------------
Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel.