6060 3 pt wont raise
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=142999
Printed Date: 22 Sep 2025 at 4:29pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 6060 3 pt wont raise
Posted By: DougG
Subject: 6060 3 pt wont raise
Date Posted: 30 Sep 2017 at 11:29am
|
Got a 6060 that I took the bottom screen filter out and cleaned it up, shortly after that the 3 pt got funny sometimes would raise sometimes not; now it quit raising completely, cables all move freely, I unhooked them moved the whatchamagittit by hand and nothing differt, whats the best way to get access to the valve? Thinking dirt or something moved around and lodged in the valve ??!!
|
Replies:
Posted By: victoryallis
Date Posted: 30 Sep 2017 at 11:43am
Air bubble?
-------------
8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760
|
Posted By: DougG
Date Posted: 30 Sep 2017 at 12:46pm
|
No doubt that, wish tho, been running it for a bit like this, would have thought it would've worked out by now
|
Posted By: DrAllis
Date Posted: 30 Sep 2017 at 6:26pm
|
If the remote outlets don't work either, it's a pump issue. Does the Power steering work???????????
|
Posted By: DougG
Date Posted: 30 Sep 2017 at 6:55pm
|
Everything else works good,,, has a loader on it works fine
|
Posted By: DrAllis
Date Posted: 30 Sep 2017 at 6:59pm
|
Both levers have to be all the way rearward for hitch to raise.
|
Posted By: MACK
Date Posted: 30 Sep 2017 at 9:36pm
|
Remove seat and plate to access valve. There is a plug that takes about a 15/16 socket. Under it is a spool about 1" in dial. And about 1 1/2 long. Lift it out, clean it and seat. Should work. MACK
|
Posted By: DougG
Date Posted: 01 Oct 2017 at 10:30am
Posted By: sherman
Date Posted: 08 Oct 2017 at 12:50pm
|
i had issues with my 3pt on my 6080 a few years ago, check your filter and the sealing orings on it. its a red filter and the o ring has to seat proper, mine was not and it was sucking air, sometimes it would work sometimes not. you can also have 2 orings in there if the last guy did not remove one. hope that helps.
|
|