ACC-60B-PS Forklift Help
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=142782
Printed Date: 18 May 2024 at 7:53pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: ACC-60B-PS Forklift Help
Posted By: Kevin Lineberger
Subject: ACC-60B-PS Forklift Help
Date Posted: 24 Sep 2017 at 10:56am
|
Hope I found the right place for some much needed help. I just bought an Allis Chalmers fork lift and i sure could use some help with parts conversions for maintenance items like filters, plugs and tune up stuff like caps rotors and points. I have been all over the internet and found some stuff but its hard to tell its really the right item. Model # ACC-60B-PS Runs on LP control # DLA 700-81-c-8173 serial # 508819 REQ USN13-67632 MSN3930 Engine serial # 593610 Pretty sure its a Continental F245 I did find the military manual and was able to get those part numbers and a few convert but its sketchy to say the least
|
Replies:
Posted By: bigcreek
Date Posted: 26 Sep 2017 at 5:37am
| Post a picture up if you would I'm curious what your lift looks like. I have a acp60h 2ps but the military manual for mine I thought was pretty amazing. Very detailed. In the back of mine was a parts chart for every piece on that forklift you could buy a part for with various companys names, addresses, and phone numbers to buy the parts from although it was outdated since it was put together in the 80's. My lift is a 1980 gasoline. |
Posted By: Kevin Lineberger
Date Posted: 26 Sep 2017 at 7:54am
Here you go thank you for the response
|
Posted By: Kevin Lineberger
Date Posted: 26 Sep 2017 at 7:58am
|
Posted By: Kevin Lineberger
Date Posted: 26 Sep 2017 at 7:59am
|
Posted By: Kevin Lineberger
Date Posted: 26 Sep 2017 at 8:00am
|
Posted By: Kevin Lineberger
Date Posted: 26 Sep 2017 at 8:02am
| sorry for the large size didnt know how to properly size the pics |
Posted By: bigcreek
Date Posted: 26 Sep 2017 at 8:35pm
| Nice paint job. Is that rated for 6000#? |
Posted By: Kevin Lineberger
Date Posted: 28 Sep 2017 at 4:25pm
| 5000# |
Posted By: Kevin Lineberger
Date Posted: 29 Sep 2017 at 7:50am
| Actually it is 6000# I was incorrect |