7040 PD transmission filters
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=142424
Printed Date: 04 Apr 2026 at 6:54pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7040 PD transmission filters
Posted By: jazzsuds
Subject: 7040 PD transmission filters
Date Posted: 13 Sep 2017 at 11:05am
|
I have a 7040 PD and need your help in identifying the part number for the transmission filter and where it is located and is there one or two filters?
Thanks
|
Replies:
Posted By: lowell66dart
Date Posted: 13 Sep 2017 at 1:03pm
Go to AGCO parts books and log in as a guest. Search for your tractor and this will tell you what you need. Good place to buy a manual too. Good luck.
-------------
AC 6080 (8030,7060,200,175,D-17HC, 6040,160,6140 all gone) Farmall 1066 & 656 Hi-Clear (for sale), White 2-62 High Clearance, JD 4255 Hi Clear.
|
Posted By: REEDE
Date Posted: 13 Sep 2017 at 6:47pm
|
The AGCO filter # is 70267600 for the PD transmission.
|
Posted By: Dans 7080
Date Posted: 13 Sep 2017 at 8:28pm
There are two filters. Bottom side of trans one on each side behind round covers. Make sure they go back together the was they came apart. I can get part numbers tomorrow.
-------------
When someone tells you Nothings Impossible, Tell them to slam a revolving door
|
Posted By: Lynn Marshall
Date Posted: 13 Sep 2017 at 9:53pm
|
Dan is describing the hydraulic filters in the belly of the rear end. The transmission filter if located behind the left hand engine frame rail. It is a spin on type. There is also a screen under a plate right behind the hydraulic pumps that should occasionally be cleaned.
|
Posted By: jazzsuds
Date Posted: 13 Nov 2017 at 11:58am
|
I also have a 7040 with power director and when I took off the transmission plate behind the hyraulic pump there was supposed to be a screen to clean and put back on but instead I found a filter not a screen. Anybody know why and what the part number is?
|
Posted By: MACK
Date Posted: 13 Nov 2017 at 10:04pm
|
A filter on suction side would restrict oil flow to pump with cold oil. MACK
|
Posted By: jazzsuds
Date Posted: 05 Jan 2018 at 8:37am
|
Anyone know what the part number is for the screen filter I found underside behind the hydraulic pump behind a plate that had 6 bolts holding it on? The Allis parts diagram doesn't show it.
|
Posted By: DrAllis
Date Posted: 05 Jan 2018 at 9:01am
|
70253478 is the suction screen. It is not a paper filter, it is a screen that can be washed out and cleaned. Used on models 7010 thru 7080 and 8010 thru 8070.
|
Posted By: jazzsuds
Date Posted: 05 Jan 2018 at 10:37am
|