Farm Equipment - Char Lynn 101F

Print Page | Close Window

Char Lynn 101F

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=142241
Printed Date: 20 May 2025 at 1:39pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Char Lynn 101F

Posted By: fourthgeneration
Subject: Char Lynn 101F
Date Posted: 07 Sep 2017 at 11:46am

I have a Charl Lynn power steering motor that has 7/8" shafts that are leaking. The OD of the seal is 1-1/8".
The motor has model 101F stamped on it. There is also 371 stamped on it.
I order Eaton kit 21122-00 but it has 1" seals. Any idea who would have the correct ones?

Replies:

Posted By: Gary in da UP
Date Posted: 07 Sep 2017 at 12:47pm

Try Motion industrial

Posted By: MACK
Date Posted: 07 Sep 2017 at 9:36pm

Go to your local auto supply or implement dealer with old Orings. They are a standard oring. Match them up. MACK

Posted By: fourthgeneration
Date Posted: 11 Sep 2017 at 6:40pm

I went to a hydraulic shop and got two 7/8"x 1-1/8" quad rings. That is what Eaton shows in the assembly paperwork I found.