37 unstyled wc value
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=141836
Printed Date: 05 Apr 2026 at 12:53pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 37 unstyled wc value
Posted By: ac89
Subject: 37 unstyled wc value
Date Posted: 25 Aug 2017 at 11:44pm
|
Was wondering what you all think this old wc would be worth. Sorry no pictures. It doesn't run. Motor is free. Rear tires are bad. Has spoked front wheels and non removable hand crank. Is 500 a fair offer?
|
Replies:
Posted By: Sugarmaker
Date Posted: 26 Aug 2017 at 9:07am
I think your correct on your estimate. Also depends if your looking for parts or if this is a tractor you want to fix or restore. I think that would be a upper limit, unless its really special?
A friend has one near by for about the same price, with stuck motor.
Good luck.
Regards,
Chris
-------------
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet, 66 F100.
|
Posted By: ac89
Date Posted: 26 Aug 2017 at 1:54pm
|
Also missing the fenders and air cleaner assembly. Motor has good compression as far as I can tell. Block has a patch over on the exhaust side.
|
Posted By: ac89
Date Posted: 28 Aug 2017 at 4:12pm
|
He wants 600 for it with a patched block. Missing the fenders and air cleaner. Has the 6 lug rims on the front. The rest of the tin is in good condition. Of I had a way to post pictures I would.
|
Posted By: jbirnsch
Date Posted: 28 Aug 2017 at 6:23pm
|
The more information you post about it the price keeps going down .......
|
Posted By: ac89
Date Posted: 28 Aug 2017 at 6:26pm
|
That's all that's wrong with it. I'm more interested in saving it than anything. And up here in maine the unstyled are getting hard to find
|
Posted By: ac89
Date Posted: 28 Aug 2017 at 6:28pm
|
It does run. Runs good actually. I'm thinking of taking the bolted plate off and welding the block. But idk if I'd be opening up another can of worms though. .. Guess it depends on how bad the crack is. .
|
Posted By: garr
Date Posted: 28 Aug 2017 at 9:03pm
|
I have a styled WC that had a bad cracked block Had it welded and it is fine After painting you can't tell the weld is there
|
Posted By: ac89
Date Posted: 29 Aug 2017 at 4:39am
|
That's what I'm thinking I can do with this. If it's done right it can be barely noticeable. Thanks for the replies everyone
|
Posted By: Gary
Date Posted: 29 Aug 2017 at 5:03am
It would appear you have already bought the tractor, have it home, and have had it running.
Correct ?
Gary
|
Posted By: ac89
Date Posted: 29 Aug 2017 at 5:59pm
|
Correct. I cleaned the carb it had some gunk in it. Then after a few good tugs it fired up. Will see about welding the block at a different date. I may take it to the shop up the road
|
|