Farm Equipment - Decal placement

Print Page | Close Window

Decal placement

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=141566
Printed Date: 01 Jan 2026 at 1:51am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Decal placement

Posted By: Maurice/Pa
Subject: Decal placement
Date Posted: 17 Aug 2017 at 7:50pm

On the 45 diesel the right side has a bolt hole in the hood for the power steering tank, how do you place the decal without hitting it?

Replies:

Posted By: Dans 7080
Date Posted: 17 Aug 2017 at 8:25pm

Take bolt out place decal on and with a razor "x" the hole and put the bolt back through. I did it with mine.

-------------
When someone tells you Nothings Impossible, Tell them to slam a revolving door

Posted By: Michael Crowe
Date Posted: 17 Aug 2017 at 8:49pm

The whole decal is moved toward the operator so it is completely behind the bolt of the tank. Guy Faye's book shows it in great detail. You do it the same on both sides.

-------------
The 14th Annual Exclusive AC Swap Meet will be held in Boonville, MO, March 7-8, 2025. See the club website for details: http://www.moacclub.com/

Posted By: 37alliswc
Date Posted: 17 Aug 2017 at 8:50pm

In the Original Allis-Chalmers book,it has factory drawings showing they moved decal back so the hyphen was over the bolt hole. In my opinion, it didn't look right being so far back on hood