Print Page | Close Window

Allis 720 60" mower deck

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=141562
Printed Date: 27 Apr 2024 at 1:17pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Allis 720 60" mower deck
Posted By: 190xt
Subject: Allis 720 60" mower deck
Date Posted: 17 Aug 2017 at 6:19pm
I have a 60"mower deck for my 720 iam in the process of rebuilding it and have a lot of questions about the arbors for the mower blades.was wondering if anybody has done this on there deck and if so would you be willing to answer some questions I have.my name is bob and called would be best 763-607-1807.any help would be greatly appreciated.thanks



Replies:
Posted By: AC720Man
Date Posted: 18 Aug 2017 at 4:07pm
Bob, I will be glad to help you but I am tied up this weekend pulling my 190 XT. Do you have a parts and service manual? That makes it so much easier. I will have mine handy when I call you. First off, what questions do you have so I can be prepared to answer them quickly? 

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD


Posted By: 190xt
Date Posted: 18 Aug 2017 at 8:04pm
I do have a parts manual but it's not very detailed.my question is for all the parts that go above & below the arbor assembly. Like thrust bearings &a thrust washers & a couple of small seals & cup seals. I appreciate the reply. No rush when ever you have some time that would be great.thanks again.


Posted By: AC720Man
Date Posted: 03 Sep 2017 at 9:52pm
Bob, I will call you Monday. I'm off, been putting in a lot of hours at work.

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net