Farm Equipment - 67 190xt hydurlic pump

Print Page | Close Window

67 190xt hydurlic pump

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=141496
Printed Date: 22 Aug 2025 at 10:35am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 67 190xt hydurlic pump

Posted By: Tom b 45
Subject: 67 190xt hydurlic pump
Date Posted: 15 Aug 2017 at 7:10pm

Got my pump off today and wen you look inside the front lower gear is not rotating the rest are working any ideas that's looking from the rear with the spool off the rear also the needle bearing fell into a mess wen I pulled off the rear section also any body know how many needles are in each bearing.

Replies:

Posted By: MACK
Date Posted: 15 Aug 2017 at 10:13pm

Gear broke or striped splines.
If bearing fell apart, replace them if you rebuild pump. If bearings fell apart, pump is most likely ready for replacement. MACK

Posted By: Tom b 45
Date Posted: 16 Aug 2017 at 7:36am

Thanks Mack I agree with you the plates were worn and it just looks to far gone not sure it's worth fixing at this point I don't know how good the rest of the tractoris having never used it.