Print Page | Close Window

Help ID NOS Part

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=141304
Printed Date: 01 Jan 2026 at 1:52am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Help ID NOS Part
Posted By: orange knight
Subject: Help ID NOS Part
Date Posted: 10 Aug 2017 at 12:50pm
I have these NOS parts here, part number is 261708. Called me AGCO dealer and the only thing they can give me is its a spool. Anybody know what this is? I've got about 200 of them









-------------
Specializing in Allis Chalmers Tractor and Equipment Parts

952-290-1063



Replies:
Posted By: Ken McGregor
Date Posted: 10 Aug 2017 at 1:16pm
Plunger that locks PTO shaft to tractor PTO?

regards,
Ken McGregor


Posted By: IBWD MIke
Date Posted: 10 Aug 2017 at 1:26pm
Looks like a spool valve out of a hydraulic pump to me. Maybe out of a WD? 200 would be a lifetime supply for everybody on the forum I would think.


Posted By: Allis dave
Date Posted: 10 Aug 2017 at 1:40pm
It's not out of the hydraulic pump of a WD.


Posted By: orange knight
Date Posted: 10 Aug 2017 at 1:52pm
Would be newer then a WD. I have a master parts book from 64 and it doesn't have that new of number in it.

-------------
Specializing in Allis Chalmers Tractor and Equipment Parts

952-290-1063


Posted By: Ted in NE-OH
Date Posted: 10 Aug 2017 at 9:39pm
Part of a hydraulic valve  such as a control valve for a loader or backhoe

-------------
CA, WD, C, 3 Bs, 2 Gs, WC, I-400, 914


Posted By: shameless dude
Date Posted: 11 Aug 2017 at 7:22am
I too thought it was a plunger lock for a PTO, but think it's to long for that!


Posted By: Fred in Pa
Date Posted: 11 Aug 2017 at 8:17am
  u have 200 of them ,u could make AC coat racks ,use them as pins  to hang coat or hats

-------------
He who dies with the most toys is,
nonetheless ,still dead.
If all else fails ,Read all that is PRINTED.


Posted By: Allis dave
Date Posted: 11 Aug 2017 at 3:31pm

How about a stand for one of the Buddy Dolls?

 
How long is it? Seeing how it's dated '76 It's probably out of a 7000 series or Gleaner


Posted By: LeonR2013
Date Posted: 13 Aug 2017 at 8:39am
Just figured it out. Turn signal lever for a HD41 dozer. Wouldn't have known but Shameless told me about them a long time ago. Said he'd adapted on to his Chebby.What a leader!


Posted By: john(MI)
Date Posted: 13 Aug 2017 at 7:08pm
I have a similar pin in a hydraulic valve on my little case 446.  The detent in the middle is for the float position.  It may be out of a 2 way spool.


-------------
D14, D17, 5020, 612H, CASE 446



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net