char lynn torq generator
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=141076
Printed Date: 29 Sep 2025 at 6:48pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: char lynn torq generator
Posted By: fourthgeneration
Subject: char lynn torq generator
Date Posted: 03 Aug 2017 at 11:04am
| I have grand dads 1949 Wd that has a Char Lynn model S 101F torque generator that was installed in the 1960s. The unit is leaking from the shaft. I was wonderering where to find the appropriate seal kit for this? I put a couple O-rings that the Ago dealer gave me but I'm not convinced thats what should be in there. |
Replies:
Posted By: fourthgeneration
Date Posted: 03 Aug 2017 at 11:46am
| I think after a couple of hours of searching I believe i have a good eaton number 21122-00. |
Posted By: fourthgeneration
Date Posted: 03 Aug 2017 at 11:56am
| As a side note my dad says they paid a $100 for the power steering kit back in the early 60s. |
Posted By: SteveM C/IL
Date Posted: 03 Aug 2017 at 1:07pm
| was a lot of money back then |
Posted By: fourthgeneration
Date Posted: 03 Aug 2017 at 3:28pm
| Inflation calculator says 827 dollars. That's a good deal for the pump and generator considering that's what the generator alone costs now. |
Posted By: groundhog55
Date Posted: 03 Aug 2017 at 3:37pm
| I have a book for that. I can get the char-lynn part # and you can make sure. They did cost 100.00 back then, I know because the price is written down in my parts book. |
Posted By: fourthgeneration
Date Posted: 03 Aug 2017 at 6:38pm
| That would be cool. |
Posted By: Tom IA
Date Posted: 03 Aug 2017 at 6:56pm
| I got one of E Bay very good price just need the model no |
Posted By: Ryan Renko
Date Posted: 03 Aug 2017 at 8:10pm
| Force America. |
Posted By: Michael V (NM)
Date Posted: 03 Aug 2017 at 10:33pm
I hope this works...
|
Posted By: Michael V (NM)
Date Posted: 03 Aug 2017 at 10:39pm
 here is the first page..
|
Posted By: fourthgeneration
Date Posted: 03 Aug 2017 at 10:53pm
| Thank you. I would post these same pics but i haven't investigated how to do it on this board. |
Posted By: Michael V (NM)
Date Posted: 03 Aug 2017 at 11:13pm
|
I scanned them onto my puter,,then use the "post Reply" not the "quick reply",, go to the little green tree icon at the top of the box, , a 'browse' will come up then upload pics etc...I didn't get these resized the same, that's why their different sizes.... I think there's picture posting info on the 'knowledge base' page
|