Off color help needed!! Minne Mo.
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=140983
Printed Date: 31 Dec 2025 at 8:39pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Off color help needed!! Minne Mo.
Posted By: cosborn
Subject: Off color help needed!! Minne Mo.
Date Posted: 31 Jul 2017 at 6:46pm
Ma got hold of a Minneapolis Moline Five Star gas. Puter doesn't like yesterdays tractors and google doesn't understand what I want. So here I am! Don't have a manual yet. old owner cant find there's and a new one wont be in for awhile. Add a bit of a bet to the mix and there you go  . Was told they had it running but lost a bolt that seems to hold the cam shaft in place/keep it from sliding back and forth. Found a fitting bolt and retaining nut. So here I am wondering if one of y'all would happen to know what the valve lash/gap would be and what the torque on them bolts would be. Ill post some pics if I ever get the phone and puter to act civil. ------------- 1949 "C" vin #c71215, 1939 "B" Wide front, WD45 nf, WD45 wf, 1941 "C" work in progress. Wd wide front |
Replies:
Posted By: cosborn
Date Posted: 31 Jul 2017 at 7:36pm
 ------------- 1949 "C" vin #c71215, 1939 "B" Wide front, WD45 nf, WD45 wf, 1941 "C" work in progress. Wd wide front |
Posted By: Gatz in NE
Date Posted: 31 Jul 2017 at 9:12pm
"Them bolts" ? you mean the valve adjusting locknuts, or that cam retaining bolt ? Here's a brief chart showing the the specs for various MM tractors. http://fiorelli.tripod.com/tune.html" rel="nofollow - http://fiorelli.tripod.com/tune.html I've been told to allow about .003 more on those settings when cold, then when it's up to temp. set them to HOT spec. |
cosborn wrote:Posted By: cosborn
Date Posted: 01 Aug 2017 at 6:38am
|
Cam retaining bolts. ------------- 1949 "C" vin #c71215, 1939 "B" Wide front, WD45 nf, WD45 wf, 1941 "C" work in progress. Wd wide front |
Posted By: Gatz in NE
Date Posted: 01 Aug 2017 at 8:32am
| http://www.engineershandbook.com/Tables/torque.htm" rel="nofollow - http://www.engineershandbook.com/Tables/torque.htm |