Print Page | Close Window

L59 woods on a B

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=140972
Printed Date: 31 Dec 2025 at 8:39pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: L59 woods on a B
Posted By: Dennis Mills
Subject: L59 woods on a B
Date Posted: 31 Jul 2017 at 1:50pm
I need a couple photos of the rear bracket that goes between the final drive housings with an overall width. I have the bracket fo a C and want to narrow it as well as center the mower brackets. Thank you in advance



Replies:
Posted By: Hubnut
Date Posted: 31 Jul 2017 at 8:17pm
Dennis,
I have that set up on my B.  Can't get pics right now, but that has been shown on here before.  Try using the google and an image might come it.  I will get you some measurements if you tell me what you want.


-------------
1940 B "Lucy"
1941 B w/ Woods L59 "Flavia"
1942 B w/ finish mower "Dick"
1941 C w/ 3-point "Maggie"
1947 C SFW w/ L306 "Trixie"
1972 314H


Posted By: Dennis Mills
Date Posted: 31 Jul 2017 at 9:37pm
I am looking for a pic with measurements for the overall width and of the brackets that go to the mower location. My bracket had the mower offset to the starter side on the C. Thank you


Posted By: Dakota Dave
Date Posted: 01 Aug 2017 at 11:05am
You just cut 6" off each end the mower is suposed to be offset to the right side.the pulley bracket needs to be in the same location in relationship to the belt pulley in order for the belt to run true.


Posted By: Dennis Mills
Date Posted: 01 Aug 2017 at 11:44am
Thank you! I didn't realize the mowers were off set.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net