Loader question.
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=140756
Printed Date: 31 Dec 2025 at 1:49pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Loader question.
Posted By: Josh Day
Subject: Loader question.
Date Posted: 24 Jul 2017 at 7:18pm
Hi guys, I found this about an hour away from me the tractor has a cracked block but in the add it says 1500 for tractor and loader. My main want is a Loader for my D-17 series 4. My question is; what model loader is this if someone can tell, and would it fit on my D-17. Thanks! ------------- AC's 75' 7040, 64' D-17S4, 55'WD-45, 54' WD-45, 53' WD-45, 53' WD, 52' CA, 36' WC. IH 656. Deere's 38' A, and 47' A |
Replies:
Posted By: CTuckerNWIL
Date Posted: 24 Jul 2017 at 8:17pm
|
I think it would bolt right up to your Series IV. You best get the cash out and get that on your trailer. The loader is worth the asking price and the backhoe is probably worth more than the asking price. You can't go wrong on that deal, even if it didn't fit your tractor. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: skateboarder68
Date Posted: 24 Jul 2017 at 8:28pm
|
Its a model 500 loader, have one on a 185. No idea if it fits a D17 ------------- Orange & Silver still earnin their keep on the farm: R62, Series IV D17 nf, 185, 6080, 6080 fwa, 220, 1968 D21, 7045, DT240. |
Posted By: Chris
Date Posted: 24 Jul 2017 at 9:14pm
|
I have a 519 loader on my series 4 Chris |
Posted By: DrAllis
Date Posted: 24 Jul 2017 at 9:28pm
| 500 series. Can be made to fit your D-17 IV. Needs different brackets to rear axle ( easily fabricated) and spacer blocks between the side frames and loader frame. |
Posted By: ksbowman
Date Posted: 24 Jul 2017 at 9:51pm
| I have the Model 500 on my 170D can't be to much different. It was on a 180D when I bought it. |
Posted By: DrAllis
Date Posted: 24 Jul 2017 at 10:00pm
| 170 and 180 use the SAME axle brackets. |
Posted By: Gary
Date Posted: 25 Jul 2017 at 4:08am
|
Josh You should already have that in your yard. A 190XT with good tires, front weight, AND a hydraulic loader for $1500 !! AND it runs !! Gary |
Posted By: corbinstein
Date Posted: 25 Jul 2017 at 6:44am
| If the crack is external, use like it is after fixing the crack.. ;) |
Posted By: WF owner
Date Posted: 25 Jul 2017 at 6:57am
| If it's a diesel, and the problem is antifreeze in the oil, there's a chance it's an O ring on a sleeve, not a cracked block. |
Posted By: Gary
Date Posted: 28 Jul 2017 at 7:31pm
|
So Josh did you buy the 190XT and loader ? Gary |