Weights, for What?
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=140496
Printed Date: 31 Oct 2025 at 12:13pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Weights, for What?
Posted By: jonny2guns4u
Subject: Weights, for What?
Date Posted: 17 Jul 2017 at 9:06am
|
Hey guys, I didn't know where to post this but I bought them thinking it was a shame for them to go to scrap. I figured some Puller would like to have them cheap because I got them cheap. Problem is I have looked all over the Internet and can not find these numbers anywhere to see what they go on.   I'm guessing Ford or New Holland because there is what looks to be White and Blue paint on them. The Guy I got them from said he was using them on a Case but then Moved them to his MF. I asked him what model and he didn't remember. Anybody have any idea what these will fit and what they might be worth?
------------- Jonny2guns4u "I won't be wronged... I won't be insulted... I won't be layed a hand on... I don't do these things to other people and I require the same from them." -J.B.Books (AKA)John Wayne |
Replies:
Posted By: grinder220
Date Posted: 17 Jul 2017 at 10:27am
| They look like weights off a White. Should be around 110 pounds each if I remember right. |
Posted By: dawntreader74
Date Posted: 17 Jul 2017 at 11:02pm
| 80 pound ford weights' |
Posted By: Larry(OH)
Date Posted: 18 Jul 2017 at 5:19am
|
Looks like my WHite weights. Are they flat or tapered? ------------- '40 WC puller, '65 770 Ollie *ALLIS EXPRESS contact* I can explain it to you, BUT I cannot understand it for you!! |
Posted By: CTuckerNWIL
Date Posted: 18 Jul 2017 at 10:19am
|
Wish I had em here in Illinois. My little massey is light in the front when bush hoggin and filling the fronts with foam ballast is over $100 a tire. I don't have a front bracket for them, but could come up with something. Shipping would kill any cheap price though, I'm sure. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: jonny2guns4u
Date Posted: 18 Jul 2017 at 10:56am
I believe they are Flat. I can find out for sure this evening. Are you talking about the thickness of the weight at the top where the handle is compared to the thickness at the bottom of the weight? ------------- Jonny2guns4u "I won't be wronged... I won't be insulted... I won't be layed a hand on... I don't do these things to other people and I require the same from them." -J.B.Books (AKA)John Wayne |
Larry(OH) wrote:Posted By: Dans 7080
Date Posted: 18 Jul 2017 at 10:59am
|
The taper will be front to back. ------------- When someone tells you Nothings Impossible, Tell them to slam a revolving door |
Posted By: jonny2guns4u
Date Posted: 18 Jul 2017 at 8:59pm
Well I don't know if it is a good thing or a bad thing but I believe now after looking closer that they are tapered. They are about 2 inches thick at the back and 2 3/4 inches thick in the front. I read a thread on another forum that said the tapered weights will also fit on some Oliver 55 Series Tractors with a curved base as well as White American Tractors. ------------- Jonny2guns4u "I won't be wronged... I won't be insulted... I won't be layed a hand on... I don't do these things to other people and I require the same from them." -J.B.Books (AKA)John Wayne |
Posted By: grinder220
Date Posted: 18 Jul 2017 at 9:56pm
| They'll fit on many Minneapolis-Moline tractors as well. |
Posted By: Larry(OH)
Date Posted: 19 Jul 2017 at 5:25am
|
tapered front to back. Yes, they will fit Oliver or White brackets that have the curve to them. I actually use some on my puller to hang under the belly. I have 5-100# weights and unlike all other brands, they actually weigh 100 to 109# ------------- '40 WC puller, '65 770 Ollie *ALLIS EXPRESS contact* I can explain it to you, BUT I cannot understand it for you!! |
Posted By: jonny2guns4u
Date Posted: 19 Jul 2017 at 8:21am
|
Okay, since nobody has said a dollar amount of what these things might be worth. I'm guessing it's because everyone wants a deal. I'll be honest I did get them at what I thought was a good price. Since this is not the classified area I'll stick my neck out and ask, is $120 too much to ask for these with pickup only? If I were to sell them I don't want to ask a retail price for them as I got what I thought was a good deal but I don't want to lose money either. ------------- Jonny2guns4u "I won't be wronged... I won't be insulted... I won't be layed a hand on... I don't do these things to other people and I require the same from them." -J.B.Books (AKA)John Wayne |
Posted By: grinder220
Date Posted: 19 Jul 2017 at 10:27am
| $80 to $100 each is what people ask for them around here. |
Posted By: DiyDave
Date Posted: 19 Jul 2017 at 6:26pm
| Goin rate, fer me, is a dollar a pound, if i'm lookin fer em. Selling rate, is whatever the market will bear... |
Posted By: Ken in Texas
Date Posted: 24 Aug 2017 at 11:41am
| $60 each, $120 the pair, if they weigh close to 100# is not a bad price. If you are a old puller like me, moving 100# weights around hurts my back too much to be interested at any price. |
Posted By: injpumpEd
Date Posted: 28 Aug 2017 at 5:25pm
|
that is a WHITE part number on them. $1/lb is for desirable weights like IH 100#. The odd weights seem to be about half that. ------------- 210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers! |