All crop hitch
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=140270
Printed Date: 26 Sep 2025 at 10:01pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: All crop hitch
Posted By: Travis2766
Subject: All crop hitch
Date Posted: 09 Jul 2017 at 8:44pm
|
Does anyone have a picture of the ring/ball hitch for an all crop 66 combine? I can't seem to find a picture. My combine has a regular pin hitch that someone fab'd up and put on it. Is there an advantage to the ring hitch? ------------- 190XT Series III, D17 Series IV, D15 Series II, All Crop 66 and a whole mess of equipment. |
Replies:
Posted By: combinechris
Date Posted: 09 Jul 2017 at 9:27pm
|
More of a preference or if you want to keep it original. ------------- 35 combines and 15 forage harvesters. mostly allis combines and equipment.WTB 2 row cornhead for a 90 |
Posted By: CrestonM
Date Posted: 09 Jul 2017 at 10:02pm
| It allows you to turn sharper without binding on the hitch, or so it seems to me. I think it's easier to hook up as well. I can get a photo tomorrow if I remember. |
Posted By: littlemarv
Date Posted: 09 Jul 2017 at 10:07pm
|
I have lots of photos, but I won't pay Photobuckets ransom to put it here. I will post some once I find a way again, if nobody else puts any up ------------- The mechanic always wins. B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
Posted By: combinechris
Date Posted: 09 Jul 2017 at 10:08pm
|
I will from my parts book if that will help you out in the morning ------------- 35 combines and 15 forage harvesters. mostly allis combines and equipment.WTB 2 row cornhead for a 90 |
Posted By: HD6GTOM
Date Posted: 09 Jul 2017 at 10:38pm
| I have 2 or 3 of them in the shed, had to dig them out to move the round baler. If the old gal will show me how to post pictures I will. I think you will be happier with the pin hitch. |
Posted By: DennisA (IL)
Date Posted: 09 Jul 2017 at 11:27pm
|
Here's a few pictures. If you need more let me know. http://s161.photobucket.com/user/caallis/media/60%20All-Crop%20Harvester/IMG_1368_zpsdm7zo6mx.jpg.html" rel="nofollow">  http://s161.photobucket.com/user/caallis/media/60%20All-Crop%20Harvester/IMG_1369_zps4axgp4nn.jpg.html" rel="nofollow">  http://s161.photobucket.com/user/caallis/media/60%20All-Crop%20Harvester/IMG_1367_zpsvjzhzqsd.jpg.html" rel="nofollow">  http://s161.photobucket.com/user/caallis/media/60%20All-Crop%20Harvester/IMG_1366_zpsfosan9cc.jpg.html" rel="nofollow">  http://s161.photobucket.com/user/caallis/media/60%20All-Crop%20Harvester/IMG_1365_zpsasbicrzu.jpg.html" rel="nofollow">  http://s161.photobucket.com/user/caallis/media/60%20All-Crop%20Harvester/IMG_1364_zpsc9b8wkx6.jpg.html" rel="nofollow">  ------------- Thanks & God Bless Dennis |
Posted By: Travis2766
Date Posted: 10 Jul 2017 at 5:10am
|
Great pictures Dennis! Thanks ------------- 190XT Series III, D17 Series IV, D15 Series II, All Crop 66 and a whole mess of equipment. |
Posted By: wfmurray
Date Posted: 10 Jul 2017 at 10:04am
| We wore out three or four pin hitches then changed to the ball type.No loose motion in the ball and never wore it out. Keep it greesed. |
Posted By: Travis2766
Date Posted: 10 Jul 2017 at 10:21am
|
I never thought of the motion wearing the pin hole! Good point ------------- 190XT Series III, D17 Series IV, D15 Series II, All Crop 66 and a whole mess of equipment. |
Posted By: Dmpaul89
Date Posted: 10 Jul 2017 at 11:14am
| Make sure you have a good lock washer on the bolt. Course threads. Ive lost two by leaving them on the drawbar while using 3pt equipment. The nut comes off and the ball falls right out cause the shank is half the width of the drawbar hole |
Posted By: Mikez
Date Posted: 10 Jul 2017 at 10:23pm
| Might have a NOS hitch assy |
Posted By: Brian Jasper co. Ia
Date Posted: 11 Jul 2017 at 12:48pm
|
Dennis's hitch is missing the base that goes under the ball. I have a complete one but like the other guys I'm not paying Photobucket's ransom either. ------------- "Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford |
Posted By: DennisA (IL)
Date Posted: 11 Jul 2017 at 12:57pm
I have never seen one with a base. If you want to send me a picture I would be happy to post it. Just so you know, I don't pay Photobucket a dime. ------------- Thanks & God Bless Dennis |
Brian Jasper co. Ia wrote:Posted By: combinechris
Date Posted: 11 Jul 2017 at 1:42pm
|
None of mine have a base either. ------------- 35 combines and 15 forage harvesters. mostly allis combines and equipment.WTB 2 row cornhead for a 90 |
Posted By: CrestonM
Date Posted: 11 Jul 2017 at 2:17pm
| I guess I don't know what you guys mean by "base". Mine looks just like Dennis'. |
Posted By: KGood
Date Posted: 11 Jul 2017 at 3:54pm
| My #7 pull type sickle mower has the ball hitch also. They are not as bad as you would think when hooking up by yourself. |
Posted By: Travis2766
Date Posted: 11 Jul 2017 at 3:57pm
|
Anyone have one (both sides) they might want to sell? PM me with a price ------------- 190XT Series III, D17 Series IV, D15 Series II, All Crop 66 and a whole mess of equipment. |
Posted By: Brian Jasper co. Ia
Date Posted: 11 Jul 2017 at 10:51pm
|
I'll have to figure out how to post a pic without photobucket, but there is a base the ball sets on. Mine also has a fine thread bolt and if I remember correctly it has a hole through it for a cotter pin. ------------- "Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford |
Posted By: DennisA (IL)
Date Posted: 11 Jul 2017 at 11:09pm
You are correct, fine thread bolt with cotter pin hole. ------------- Thanks & God Bless Dennis |
Posted By: CrestonM
Date Posted: 13 Jul 2017 at 9:37pm
x2!
|