Shimming The Power Director Video
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=140221
Printed Date: 29 May 2025 at 1:02am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Shimming The Power Director Video
Posted By: DennisA (IL)
Subject: Shimming The Power Director Video
Date Posted: 08 Jul 2017 at 7:46am
|
Here is the video that shows how to shim the power director. Thanks https://youtu.be/GOUu3ZBdiXs" rel="nofollow - Setting up the Power Director ------------- Thanks & God Bless Dennis |
Replies:
Posted By: TimNearFortWorth
Date Posted: 08 Jul 2017 at 8:24am
|
Useful info that def. needs to be added to the knowledge base section. Between yours and Don D's video, very informative PD rebuild/adjustment information that will be used by many for years to come. This kind of detail has prompted me to tear into a donor 15II with factory 3-pt. that I picked up quite reasonably, that now will be put back to work vs. parting it out. Thanks much for posting Dennis as we appreciate the time it takes to document particulars like this.
 |
Posted By: Ted J
Date Posted: 10 Jul 2017 at 9:25pm
|
GRrrrrreat Job Dennis!! These two videos will help lots of folks in the future. ------------- "Allis-Express" 19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17 |