Farm Equipment - D17 Series IV PD shims/ brakes

Print Page | Close Window

D17 Series IV PD shims/ brakes

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=139855
Printed Date: 29 Dec 2025 at 7:28pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D17 Series IV PD shims/ brakes

Posted By: vaAllis90
Subject: D17 Series IV PD shims/ brakes
Date Posted: 27 Jun 2017 at 7:29pm

Hey guys,

Does anyone have AGCO part numbers for both short and long power director shims? I looking for both .010 and .015 in each shim.

Also what is the correct way to adjust D17 Series III/IV brakes with no external adjusting screws?

Thanks for the help guys, I have a few tractors that need odds and ends addressed and I hope to gather most of the parts before I start on them.

Replies:

Posted By: MACK
Date Posted: 27 Jun 2017 at 9:29pm

Adjust brakes by screwing linkage between pedals and brakes. MACK