Farm Equipment - G Cultivators

Print Page | Close Window

G Cultivators

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=139724
Printed Date: 24 Dec 2025 at 11:05am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: G Cultivators

Posted By: FarmerJohn22
Subject: G Cultivators
Date Posted: 23 Jun 2017 at 9:54pm

Hey all,

I have two questions about my G. First, how difficult is it to add a rear toolbar? If I find one, does it just bolt on? Were all G's made for a rear toolbar, or do I need to look for something on my tractor to see if it will fit?

Second question, anybody know where I can locate pieces for the G cultivator? I am specifically looking for beet knives to go on a planet jr. cultivator. Thanks!

-------------
1953 CA, 1950 G, 1970 160

Replies:

Posted By: Chalmersbob
Date Posted: 23 Jun 2017 at 10:44pm

The rear lift justs bolts onto the rear of the tractor. It will have 2 brackets, the tool bar and the lift. Our local craigs list has a listing in New Jersey for cultivator parts but that won't help you much. Bob

-------------
4 B's, 1 C's,3 CA's, 2 G's WD, D14, D15, B-1, B10, B12, 712S,

Posted By: Gerald J.
Date Posted: 24 Jun 2017 at 10:35am

Shoup has a wide collection of cultivator shovels. http://www.shoupparts.com" rel="nofollow - http://www.shoupparts.com

I have a couple G manuals on implements on line
http://www.geraldj.networkiowa.com/Trees/Model%20G%20Implement%20Setup%20%28TM-3%29%20PART%201.pdf" rel="nofollow - http://www.geraldj.networkiowa.com/Trees/Model%20G%20Implement%20Setup%20(TM-3)%20PART%201.pdf

http://www.geraldj.networkiowa.com/Trees/Model%20G%20Implement%20Setup%20%28TM-3%29%20PART%202.pdf" rel="nofollow - http://www.geraldj.networkiowa.com/Trees/Model%20G%20Implement%20Setup%20(TM-3)%20PART%202.pdf

A G owner's manual
http://www.geraldj.networkiowa.com/Trees/Allis%20Chalmers%20G%20Owners%20Manual%20%28TM-4A%290001.pdf" rel="nofollow - http://www.geraldj.networkiowa.com/Trees/Allis%20Chalmers%20G%20Owners%20Manual%20(TM-4A)0001.pdf

And a G shop manual
http://www.geraldj.networkiowa.com/Trees/Allis-Chalmers-G-B-C-CA-Service.pdf" rel="nofollow - http://www.geraldj.networkiowa.com/Trees/Allis-Chalmers-G-B-C-CA-Service.pdf

Gerald J.

Posted By: Bill Long
Date Posted: 24 Jun 2017 at 11:36am

Gerald J. That page should be on our Knowledge page. I hope it is. Wonderful information
Good Luck!
Bill Long

Posted By: FarmerJohn22
Date Posted: 26 Jun 2017 at 1:13pm

Thanks for the info guys. I saw I lot of sweeps at shoupparts, but no beet knives. If anybody else has a source for beet knives, let me know. Also, if there is anybody around me who has a rear toolbar to sell, I'd be interested in that as well. Thanks!

-------------
1953 CA, 1950 G, 1970 160

Posted By: Brendan (AB)
Date Posted: 29 Jun 2017 at 12:26am

Hoss Tools makes some sweeps and cultivator teeth that fit the old Planet Jr cultivators. Maybe these are what you are looking for? I've purchased some from Lee Valley Tools for an Allis G independent gang cultivator. See the webpage listed below:

http://www.leevalley.com/us/garden/page.aspx?p=66873&cat=2,44823,66873" rel="nofollow - http://www.leevalley.com/us/garden/page.aspx?p=66873&cat=2,44823,66873

Posted By: FarmerJohn22
Date Posted: 01 Jul 2017 at 10:08pm

That's what I was looking for. Thanks!

-------------
1953 CA, 1950 G, 1970 160

Posted By: Tilmor
Date Posted: 20 Jul 2018 at 3:49pm

http://www.tilmor.com " rel="nofollow - www.tilmor.com ;

We have toolbars and tools for Allis Gs

Thanks

Ben Baltzly

Posted By: Dusty MI
Date Posted: 21 Jul 2018 at 9:26am

Safari can't open page.

-------------
917 H, '48 G, '65 D-10 series III "Allis Express"

Posted By: Tilmor
Date Posted: 23 Jul 2018 at 6:13am

We also have those kind of parts. Thanks

Ben Baltzly

http://www.tilmor.com" rel="nofollow - www.tilmor.com

Posted By: Gerald J.
Date Posted: 23 Jul 2018 at 10:07am

Part 2 of the G implement manual linked above has a few pages on the rear mounted tool bar.

Gerald J.