? for 4W305 owners
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=139334
Printed Date: 25 Aug 2025 at 10:08pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: ? for 4W305 owners
Posted By: Oldred
Subject: ? for 4W305 owners
Date Posted: 11 Jun 2017 at 11:38pm
|
While tractor is running @ 1000-1200rpm and me doing a walk around is it normal for a higher type pitch whine/noise where pto shaft is rotating going into rear end housing. Cannot hear inside the cab at all while operating at any rpm. Just curious if normal or not. All oil levels up to proper levels. New tractor to me ran about 50 hrs so far everything seems to work ok. Thx Mark
|
Replies:
Posted By: allisguy.11
Date Posted: 12 Jun 2017 at 11:45am
| our 8550 does this. has since we have had it |
Posted By: CAL(KS)
Date Posted: 12 Jun 2017 at 12:31pm
|
sounds normal to me. the hydraulic pumps are back there ------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: Amos
Date Posted: 12 Jun 2017 at 5:14pm
| Yep, that is what mine has done as long as I have owned it. |
Posted By: Dale
Date Posted: 12 Jun 2017 at 8:15pm
|
Same with mine |
Posted By: Oldred
Date Posted: 12 Jun 2017 at 8:22pm
 Thanks guys.Now I can quit being such a worry wart LOL. Other than that (which is now a none issue) I really like the visibility out of this unit for seeding and seeing the drawbar hooking up equipment is really nice.  |
Posted By: Daehler
Date Posted: 12 Jun 2017 at 8:44pm
|
Thats a nice looking tractor! Where did you find it? ------------- 8070FWA,7080 BlackBelly, 7045,2 200s,D19,D17,G, WD,45,UC,7 AC mowers and lots more! "IT TAKES 3 JD's TO OUT DO AN ALLIS, 2 TO MATCH IT IN THE FIELD AND 1 FOR PARTS!" |
Posted By: Oldred
Date Posted: 12 Jun 2017 at 9:11pm
I found it about 9 hours east of me in Saskatchewan. I made the deal with the fella as this was his fathers tractor but he is a JD man. It turned out they couldn't sell it a couple years back as they needed it on the grain cart for the pto until they found a replacement. Well in December of 16' they found a replacement and I was contacted to cough up at the agreed upon price from 3 years ago. They were really stand guys about it and I took delivery just in time for spring seeding. Everyone of these 4w305 that come up for sale in Canada seem to end up going south of the border. Mark
|
Daehler wrote:Posted By: DennisA (IL)
Date Posted: 12 Jun 2017 at 10:49pm
|
Very nice tractor. ------------- Thanks & God Bless Dennis |
Posted By: HD6GTOM
Date Posted: 13 Jun 2017 at 7:31am
| Ya we like them down here, Rand M equipment sold several I drooled over when they were new and on the lot. Same with 8550's. |
Posted By: tornado8070
Date Posted: 14 Jun 2017 at 7:21pm
|
Nice tractor and normal noise on mine as well. ------------- 09’ DT205B, 08’ DT220A, 83' 8070 MFWD, 83’ 8070 85’ 8050 MFWD, 83' 8030, 82' 8010, 85’ 6080 MFWD, 84’ 6080, 79' 7020, 85' M3 RWD, 85' 920 diesel,AC C-50 forklift. |