100 Series Disc Question
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=139084
Printed Date: 18 Jun 2025 at 8:55pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 100 Series Disc Question
Posted By: DakotaSteve
Subject: 100 Series Disc Question
Date Posted: 04 Jun 2017 at 11:49pm
| Will an 8' 100 series Allis disc work on a CA or WD....looks to be nearly the same as a model 20....? |
Replies:
Posted By: boggen
Date Posted: 05 Jun 2017 at 3:55am
|
not sure what model i have for the CA. i want to say 6 foot length. approx 1 foot width on each side of rear tires (rear tires set to max width). and it is all the CA can do to pickup the entire disc. and even then one of the rear end discs wants to drag just a tiny bit if you hit a bump or like. i gotta be careful coming out of a freshly plowed area and disc still some what in ground. or the front wheels will come off the ground on the CA. and that is with the side weights up on the front engine. (no direct weights out on the very front) ======= pulling the disc is no problem. it is just lifting it up, so you can actually turn that is the issue.
|
Posted By: Brian F(IL)
Date Posted: 05 Jun 2017 at 8:05am
Yes, it should work but I'm sure the front end of the CA will need more weight. I've got this #109 that I pull with my WD-45. I've got front wheel weights and I still can get the front end in the air if I get too aggressive (aka stupid) if I take off too fast with the disc raised. |