Print Page | Close Window

Holmes Sale

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=138998
Printed Date: 28 Dec 2025 at 8:08pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Holmes Sale
Posted By: Richardmo
Subject: Holmes Sale
Date Posted: 02 Jun 2017 at 10:46am
Got  a few tractors bought from the sale.
 
Ca single front $1100.00 nice looking tractor- I will leave at as is no painting.
 
D 14 $700.00 parts tractor motor has water in it has power steering.
 
D14 LP $900.00 bought the LP carb off of one of the tables for $120.00
bought a few other parts also.
 
http://s128.photobucket.com/user/richhc/media/D%2014%20oxnard/Csinglefront2.JPG_zpsuzqwfy39.jpg.html" rel="nofollow">
http://s128.photobucket.com/user/richhc/media/D%2014%20oxnard/Csinglefront3.JPG_zpsjrgcg10h.jpg.html" rel="nofollow">
 
 
 
I did not right down a lot of the prices.
There was  WD 45 with factor power steering sold for about $2000.00
Most of the other WD 45 sold for $350.00 to $500.00
WC's about the same.
Did not get any of the D 17 or D 19 prices.
 
equipment was in good shape.
The ripper sold for about $550.00 -
Carry all - about the same price.
 
  
 
 
 
 
 
 



Replies:
Posted By: Richardmo
Date Posted: 02 Jun 2017 at 10:56am
Thanks to Terry for getting 2 of my tractors closer to Rolla.
Paul load had 2 Wd45 and Wc with loader and my D 14 LP tractor.
   
 
http://s128.photobucket.com/user/richhc/media/D%2014%20oxnard/D14.JPG_zpsfthtzu9h.jpg.html" rel="nofollow">
http://s128.photobucket.com/user/richhc/media/D%2014%20oxnard/D14LP3.JPG_zpsv3c5u47d.jpg.html" rel="nofollow">
http://s128.photobucket.com/user/richhc/media/D%2014%20oxnard/Paul5.JKPG_zpsmd9nbj4x.jpg.html" rel="nofollow">
http://s128.photobucket.com/user/richhc/media/D%2014%20oxnard/Paul6.JPG_zpsrde28fcx.jpg.html" rel="nofollow">
http://s128.photobucket.com/user/richhc/media/D%2014%20oxnard/Paul7.JPG_zpsxptnohqo.jpg.html" rel="nofollow">
http://s128.photobucket.com/user/richhc/media/D%2014%20oxnard/HOlmes1.JPG_zpst4xjmxce.jpg.html" rel="nofollow">
http://s128.photobucket.com/user/richhc/media/D%2014%20oxnard/HOlmes1.JPG_zpst4xjmxce.jpg.html" rel="nofollow">
 
 
 
 
 
 
 
 
 


Posted By: Fred in Pa
Date Posted: 02 Jun 2017 at 11:47am
Did not what hills around with that loader

-------------
He who dies with the most toys is,
nonetheless ,still dead.
If all else fails ,Read all that is PRINTED.


Posted By: Kenny L.
Date Posted: 02 Jun 2017 at 3:33pm
The subsoiler sold for 475.00, the post hole digger sold 500.00, the three blade extension went for 160.00 ea ,the s/c disk I believe went for 800.00. I'll let Richard tell you what the single front assembly went for.Wink   
 
 


Posted By: IBWD MIke
Date Posted: 03 Jun 2017 at 8:51am
I really wanted to go to this sale! Too far from home, didn't want to burn a vacation day and planting beans was more important.


Posted By: djg390
Date Posted: 03 Jun 2017 at 9:03am
I bought the subsoiler and the blade extensions. I was the next to last bidder on the carry all but it was more than I wanted to pay


Posted By: Fred in Pa
Date Posted: 03 Jun 2017 at 9:10am
So what where them prices

-------------
He who dies with the most toys is,
nonetheless ,still dead.
If all else fails ,Read all that is PRINTED.


Posted By: Unit3
Date Posted: 03 Jun 2017 at 5:45pm
Great straight loader on the WC. If you get a load on it and want to let it down slow, turn off the pto, set the loader to raise and pull out on the lever like you would to lower it. Somehow the oil turns the pump and pto in reverse. 

-------------
2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net