7000 fuel gauge question
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=138953
Printed Date: 28 Dec 2025 at 9:48pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7000 fuel gauge question
Posted By: Hawk
Subject: 7000 fuel gauge question
Date Posted: 31 May 2017 at 3:05pm
|
Can anyone tell me what ohm resistance the fuel gauge uses on a 7000 maroon belly. I haven't been able to find it in my service manual. I think that my sender is bad or possibly the wrong one but I don't know what the resistance is supposed to be when full and empty. Thanks for any help. Chris
|
Replies:
Posted By: LB0442
Date Posted: 01 Jun 2017 at 4:10pm
I knew I have seen it some where. This is the 7000 manual, just basically ground it and watch gauge sweep. Here is the page from the 6080 manual which uses the same part number gauge so the resistance readings should be right on.  |
Posted By: Hawk
Date Posted: 02 Jun 2017 at 3:14pm
|
LB0442, Thanks for the reply, I had checked the gauge based on the 7000 manual and all was working, but couldn't find the resistance for the sender to check it. That is exactly what I needed. |