1947 WC manifold/exhaust pipe
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=138804
Printed Date: 28 Dec 2025 at 9:48pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 1947 WC manifold/exhaust pipe
Posted By: jrsinn83
Subject: 1947 WC manifold/exhaust pipe
Date Posted: 26 May 2017 at 1:50pm
|
In the long process of putting back together my restoration project I have lost the exhaust pipe. My dad has informed me that their is a metal pipe that he thinks screws into thread in the manifold where that exhaust pipe goes. My question does anybody know the size or where I can bye this pipe to screw into the manifold hole? The way my dad explained it is that your screw the pipe into the manifold and then put the exhaust pipe over it??? Any info would be much appreciated.
|
Replies:
Posted By: CAL(KS)
Date Posted: 26 May 2017 at 2:40pm
unless it has the later d17 manifold it wont have a screw in pipe. early manifolds had a pipe section that slid in and was locked in with a bolt once the muffler was on.
-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
Posted By: jrsinn83
Date Posted: 26 May 2017 at 3:25pm
|
Do you know what that manifold looks like? Mine has a front square plate with four screws
|
Posted By: Joe(TX)
Date Posted: 27 May 2017 at 7:26am
Go to agcopartsbook.com and look at the parts diagram. Cal is right, the screw in pipe was not until the D17 series IV. The WC had a slide in pipe with a bolt holding it in.
-------------
1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A
|
Posted By: prettyview
Date Posted: 27 May 2017 at 7:56am
|
I have a WF and muffler just slides over manifold and bolts with 1 bolt and the manifold is the same as you describe
|
Posted By: jrsinn83
Date Posted: 27 May 2017 at 8:03am
|
So does the after market mufflers come with that set up or do I need to find the pipe you set in there?
|
Posted By: AaronSEIA
Date Posted: 27 May 2017 at 8:36am
Screw in pipe started with the series 2 D17.
AaronSEIA
|
|