Farm Equipment - 2000 Plow reset cylinder

Print Page | Close Window

2000 Plow reset cylinder

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=138687
Printed Date: 18 Sep 2025 at 7:44pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 2000 Plow reset cylinder

Posted By: Fellenz
Subject: 2000 Plow reset cylinder
Date Posted: 23 May 2017 at 6:13am

Hi Everyone,

I recently picked up a four bottom 2000 series hydraulic reset plow. I definitely need to reseal one of the reset cylinders and should probably have an extra seal kit or two on hand in case other cylinders start blowing past the seals.

Is AGCO my best bet for parts? I seem to remember someone on the forum offering parts, anyone know who that was? Hoping to get this back together ASAP!

-Cheers,

Erik

Replies:

Posted By: IHCfarmer
Date Posted: 23 May 2017 at 2:41pm

I would like to know that too where is the best place to get the kits for the cylinders?? Thank

Posted By: JimWenigOH
Date Posted: 23 May 2017 at 8:51pm

Butch(OH) was the member who had the seal kits.

Posted By: Fellenz
Date Posted: 24 May 2017 at 6:25am

I sent Butch a message. Have't heard back yet. Hopefully he's around!

-Cheers

Posted By: Butch(OH)
Date Posted: 24 May 2017 at 8:12am

Hi, Sorry I havent been logged on for a few days. Yes I had some kits put together but found out that Baum Hydraulics does the same thing for less $ so I kinda dropped that deal. Link provided should be to the part on Baum's web site.
http://www.baumhydraulics.com/product.php?productid=58271&cat=0&page=1" rel="nofollow - http://www.baumhydraulics.com/product.php?productid=58271&cat=0&page=1

Posted By: IHCfarmer
Date Posted: 24 May 2017 at 8:38am

Thanks a million butch!! The local Agco dealer wanted 80$ for that seal kit!! Thank you thank you!!

Posted By: Fellenz
Date Posted: 24 May 2017 at 8:38am

Thanks Butch!

I just put in an order for a few kits from Baum. $15 each is a whole lot more reasonable than the ~$80 AGCO quoted me!

-Cheers

Erik

Posted By: Butch(OH)
Date Posted: 24 May 2017 at 8:47am

ya, I know about the $80 kits,bought one and used it to match up the parts, LOL. When you install the piston seals you need to warm them up for easier assembly, I used hot water. An extra pair of hands helps too, otherwise it's all straight forward.