HELP my 200 won't move
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=138488
Printed Date: 18 Oct 2025 at 12:53pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: HELP my 200 won't move
Posted By: Dave/cvny
Subject: HELP my 200 won't move
Date Posted: 16 May 2017 at 8:10pm
| The transmission seems to be turning so I am thinking that the power director is slipping , is there anything I can try before I send it to a shop to fix it? Thanks in advance |
Replies:
Posted By: tbran
Date Posted: 16 May 2017 at 10:57pm
|
check the pressure on the pd clutch pacs - make sure the linkage is shifting the valve all the way in and out both ways and that you do have oil in the PD side... ------------- When told "it's not the money,it's the principle", remember, it's always the money.. |
Posted By: MACK
Date Posted: 17 May 2017 at 8:42am
| Tbran, has your answer. Pin fell out of linkage. MACK |
Posted By: CAL(KS)
Date Posted: 17 May 2017 at 8:52am
While what the others have suggested is a likely cause, your statement is throwing me off. If the transmission is turning, the pd would not be slipping. Have you verified the transmisison is turning other than in neutral. how do you know? ------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Dave/cvny wrote:Posted By: Dave/cvny
Date Posted: 17 May 2017 at 1:23pm
| As far as being able to tell if the transmission is turning, when you shift it you can feel the gears turning. No the pins haven't come out of the linkage! Maybe the clutch went out of it? At this point all I know is that it will only move on level ground and I can walk faster than it will move! |
Posted By: 45 turboa-
Date Posted: 17 May 2017 at 4:10pm
|
Put the trans in gear engage the pto let the main clutch out and have someone watch the pto if pto doesn't turn your main clutch is slipping. If pto turns the PD is slipping. ------------- turbocharged |