2 bottom Disc plow question
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=138441
Printed Date: 13 Sep 2025 at 2:42pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 2 bottom Disc plow question
Posted By: Richardmo
Subject: 2 bottom Disc plow question
Date Posted: 15 May 2017 at 3:37pm
|
I want to mount a 2 bottom Disc plow I have to a WD pin hitch tractor. I would by a manual if any has one also. one of the question I have, The Disc low I have bolts to the drawbar. does it require the support that holds the drawbar to be removed? Any help appreciated. Thanks, |
Replies:
Posted By: DiyDave
Date Posted: 15 May 2017 at 6:14pm
|
Bolts to the snap coupler drawbar, and yes, you do remove the bail, otherwise it wouldn't lift/lower... Make sure the tailwheel ain't worn out, or it will pull side to side, all over the place. A new coulter, will replace the tail wheel cutting edge, nicely...
 |
Posted By: Richardmo
Date Posted: 15 May 2017 at 7:40pm
|
That what I thought on the drawbar,just wanted to make sure. Also appears that it had higher bracket not for were it bolts up to. |