radiator recore prices
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=138392
Printed Date: 21 Jun 2025 at 11:13am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: radiator recore prices
Posted By: grinder220
Subject: radiator recore prices
Date Posted: 14 May 2017 at 8:03am
| My 7050 has a radiator leak or 3 so I called a local shop for a quote and was really blown away by the price,I plan on calling another to compare. So whats the going price for one of these radiators? Haven't had to have one redone for 20 years now and I guess like everything the price went up. |
Replies:
Posted By: Luke R.
Date Posted: 14 May 2017 at 8:08am
|
Had our D21 recored for $800. I about 💩 My pants. ------------- 4-7030's,170G,220FWA,3-220's,210,D21II,D21I industrial,2-200's,3-190's,175D,2-D19D's,D19G,WD45,WD,CA,2-UCont.,5015FWA,917,B110,Gleaner F |
Posted By: MACK
Date Posted: 14 May 2017 at 8:13am
| Repair on a radiator around hear runs 50.00-100.00. Have not had one recorded so can't help there. MACK |
Posted By: DSeries4
Date Posted: 14 May 2017 at 8:19am
|
I had my 175 rad recored 3 years ago. It cost $500. But what are you going to do? The tractor isn't going to run without one. Most used ones you find will be about as good as what you already have. I say pay the price, get it done and you will not have to touch it for another 30+ years. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: jiminnd
Date Posted: 14 May 2017 at 8:29am
|
Had my 8030 recored, maybe 12 to 15 years ago, $900 but a new one at that time was stillavailable for $3200.
------------- 1945 C, 1949 WF and WD, 1981 185, 1982 8030, unknown D14(nonrunner) |
Posted By: DougG
Date Posted: 14 May 2017 at 8:37am
| Had one done for a 6080 ,it was 560,,,, all they done was sent it to a place in Tx, and had it back in 3days |
Posted By: Tom IA
Date Posted: 14 May 2017 at 11:32am
| Did you try Bills in Dewitt have had him recore a couple lot better quality than the foreign junk |
Posted By: DiyDave
Date Posted: 14 May 2017 at 6:22pm
| Hadda D-15 (II) done about 6-8 years ago, $600. Price has gone up a lot cause of environmental regs on these shops... |
Posted By: charlesbendal
Date Posted: 15 May 2017 at 5:21am
| Paid $1300 to have our 8010 recored |
Posted By: Tbone95
Date Posted: 15 May 2017 at 6:41am
| Had a 7060 design core put in my 7045 3 years ago, $900. |
Posted By: tomNE
Date Posted: 15 May 2017 at 7:20am
|
I've got one in the shop now. I'll know the news, early this week. ------------- AC from the start of my families farming career till the end! |
Posted By: Brian Jasper co. Ia
Date Posted: 15 May 2017 at 8:43am
|
If you were near Des Moines I'd say take it to Lee Highland in Des Moines. He's been around almost since radiators were invented. He doesn't have any internet presence. 515 243 2098. ------------- "Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford |
Posted By: grinder220
Date Posted: 15 May 2017 at 9:51am
|
Tom IA wrote:Posted By: Dale-OH
Date Posted: 15 May 2017 at 1:04pm
| We would be happy to have someone that would do them at all. We lost our local man that did radiator work about 5 years ago, only place we have found is expensive and a couple hour trip. We have done a few ourselves with good success if you can save the tanks. |
Posted By: HD6GTOM
Date Posted: 15 May 2017 at 8:42pm
| I took my 1800 oliver to g&d in indianola Iowa, Was $400.00 several years ago. I don't know if they are still in business. They did starters, alternaters, gennys too. |
Posted By: victoryallis
Date Posted: 15 May 2017 at 9:05pm
|
Every time I drop a radiator off I figure their goes $700 plus just the way it is. ------------- 8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760 |
Posted By: Ken(Bell.Wa)
Date Posted: 18 May 2017 at 12:01am
| 2 years ago the water pump shaft on the 8010 broke, cost $900.00 to recore that one |
Posted By: plummerscarin
Date Posted: 18 May 2017 at 9:32pm
| Last year we the 7045 recored for $800. |