Print Page | Close Window

Front mounted hydraulic pump

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=138376
Printed Date: 28 Dec 2025 at 11:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Front mounted hydraulic pump
Posted By: Dave in il
Subject: Front mounted hydraulic pump
Date Posted: 13 May 2017 at 3:35pm
I want to update my D19 diesel to an engine driven hydraulic pump. I thought somewhere I had read someone had a pump, mount and drive figured out aftermarket. Since the newest post I've found are 2012 and older I haven't had much luck.

If anybody has information or a used pump set up I'd appreciate it.

-------------
AGCO My Allis Gleaner Company



Replies:
Posted By: dt1050
Date Posted: 13 May 2017 at 4:21pm
I think I read some place that a drive hub from a ford will work as well as the shaft and the pump.  but the hub had to be from a 600/800 series ford, because the bolt pattern is 4 3/4 on center.  If I'm wrong I'm sure somebody will correct me...lol


-------------
Just cause it's orange don't make it a tractor, there's only one..Allis Chalmers


Posted By: Gary Burnett
Date Posted: 13 May 2017 at 7:15pm
My D19 has a front pump that is factory as it was bought to use a loader on by the original owner.We bought it from him back in the late 60's.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net