Farm Equipment - Adding auxilliary receptacle to 8030

Print Page | Close Window

Adding auxilliary receptacle to 8030

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=138111
Printed Date: 09 Nov 2025 at 12:05am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Adding auxilliary receptacle to 8030

Posted By: Josh in Pa
Subject: Adding auxilliary receptacle to 8030
Date Posted: 05 May 2017 at 11:43am

I have an 8030 and would like to add an auxiliary receptacle to power flashers and tail lights on some newer implements. I understand this was a factory option, but mine doesn't have it. Where will I connect my harness? I assume in the dash. Will there be terminals on the flasher unit, and I assume light switch? Or will I have to splice into the existing wires? Thanks,
Josh

Replies:

Posted By: Michael V (NM)
Date Posted: 05 May 2017 at 5:20pm

Should be some wires under the rear of the cab, kinda in front of the hydraulic valves,, dig around back there, you'll hafta put whatever plug ya want on

Posted By: JimWenigOH
Date Posted: 05 May 2017 at 8:02pm

I just did my 8050. If you want some photos, list of materials etc., send me a PM with your email.

Posted By: Unit3
Date Posted: 05 May 2017 at 9:48pm

Out behind the cab on the left hand side are two wire connectors. In them should be a left, right, tail, field light, and a ground. I am doing this from memory, so use a test light.

-------------
2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C