Print Page | Close Window

Need ideas how to free up bearings

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=137989
Printed Date: 09 Nov 2025 at 1:23am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Need ideas how to free up bearings
Posted By: rudyk
Subject: Need ideas how to free up bearings
Date Posted: 01 May 2017 at 8:45pm
I have a old Deere planter and the disc openers are rusted and won't spin
I have sprayed them with Pb blaster, and heated it, no luck.
Any help would be appreciated.
Mack hopefully you see this, you always seem to have answers for my questions. I can't thank you enough



Replies:
Posted By: MACK
Date Posted: 01 May 2017 at 9:17pm
If they have bushings, press them apart, clean them up, oil and put back togather. If they have bearings, best to replace bearings. A rusted bearing cleaned up and oiled has a short life.      MACK


Posted By: Ray54
Date Posted: 01 May 2017 at 9:34pm
Depending how rusted the bearing is I have had luck with some IH disc harrow bearings. Drill a very small whole in the seal and add grease,fill whole silicone gasket maker.  Pulled with a crawler so never over 4.5 MPR. Planter bears should be much smaller and cheaper so new may be a much better deal to just put new on.  


Posted By: Albert
Date Posted: 01 May 2017 at 9:49pm
What JD model number I may have some bearings for it


Posted By: rudyk
Date Posted: 02 May 2017 at 9:13pm
I thinks it's a 494


Posted By: 1947WC
Date Posted: 03 May 2017 at 8:23pm
I use JB 80 Menards has it.


Posted By: shameless dude
Date Posted: 03 May 2017 at 9:11pm
yep...squirt sum JB80 on them, go have a cup of coffee and come back to them


Posted By: CAL(KS)
Date Posted: 04 May 2017 at 7:49am
soak in diesel fuel then try to work grease in after freed up, but as Mack says they wont last long

-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20

Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net