8030 LED conversion
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=137934
Printed Date: 08 Nov 2025 at 9:06pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 8030 LED conversion
Posted By: victoryallis
Subject: 8030 LED conversion
Date Posted: 30 Apr 2017 at 12:05pm
I got two lights from Tiger lighting for my 8030 my plan is to do the two inner headlights. The issue is the tractor has two blues and a black the light has a black and red. I assume black goes to black but what about the two blues.
-------------
8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760
|
Replies:
Posted By: DennisA (IL)
Date Posted: 30 Apr 2017 at 12:44pm
Sounds like you're working with wiring for a high and low beams
-------------
Thanks & God Bless
Dennis
|
Posted By: Leon B MO
Date Posted: 30 Apr 2017 at 1:07pm
|
Use a test light to figure out which of the wires is hot, on tht 8030 2 front lights come on in the 3rd position on the switch(night, highway). No front or rear lights in the second poisiton(day highway), forth postion, all field lights are on, no flashers. With a test light, ground to the battery and see which wire is hot at what position on the switch, wire your light into that one. Leon B
-------------
Uncle always said "Fill the back of the shovel and the front will take care of itself".
|
Posted By: victoryallis
Date Posted: 30 Apr 2017 at 7:36pm
"Drivers side" had one blue one black so simple "passenger side" had two blue and a black but after I pulled the connectors both blues went to one terminal on the light itself. In the end other than working on a ladder with torn hip tissue it ended up a simple project.
-------------
8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760
|
|