Print Page | Close Window

AC7040 fuel line

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=137838
Printed Date: 21 Jun 2025 at 8:10pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: AC7040 fuel line
Posted By: jazzsuds
Subject: AC7040 fuel line
Date Posted: 27 Apr 2017 at 1:38pm
I have an AC 7040 and I have fuel running from a 1/4" black tube under my deck on the fuel pump side when tractor is running. What is that tube, where does it go to and how do I fix it? 



Replies:
Posted By: DrAllis
Date Posted: 27 Apr 2017 at 1:56pm
Cut it in two where the bad spot is and splice it together with a piece of rubber hose and two hose clamps.


Posted By: jazzsuds
Date Posted: 27 Apr 2017 at 2:09pm
Thanks for the reply but it's leaking diesel fuel from the tube  end. It looks like its a fuel release tube of some kind?


Posted By: DrAllis
Date Posted: 27 Apr 2017 at 3:24pm
I'm assuming it's fuel return to tank from the top of the injectors and the top of the injection pump. Cut an inch off of the bad end and reinstall.


Posted By: jazzsuds
Date Posted: 27 Apr 2017 at 3:42pm
OK thanks


Posted By: jazzsuds
Date Posted: 19 May 2017 at 10:17am
Hmmm I don't see where the fuel return line to the tank from the injectors attaches? Any ideas?


Posted By: DrAllis
Date Posted: 19 May 2017 at 12:09pm
Unless you've got some cobbled up plumbing, the fuel return line is at the #6 (rear) injector and goes under the cab to the top of the fuel tank.


Posted By: jazzsuds
Date Posted: 19 May 2017 at 1:03pm
OK thanks. I can't see the connection at the tank with the floor plate tight over top of the tank. Is it on the top side of the tank?


Posted By: jazzsuds
Date Posted: 19 May 2017 at 1:04pm
I guess I will have to remove the floor plate to get at the connection on the tank?


Posted By: SteveM C/IL
Date Posted: 19 May 2017 at 1:11pm
Originally posted by jazzsuds jazzsuds wrote:

I guess I will have to remove the floor plate to get at the connection on the tank?
whatever it takes


Posted By: MACK
Date Posted: 19 May 2017 at 9:28pm
Loosen the two straps holding tank. Set a jack under tank and let it down a few inches.   MACK



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net