Farm Equipment - 190 Rams

Print Page | Close Window

190 Rams

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=137794
Printed Date: 08 Nov 2025 at 9:06pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190 Rams

Posted By: Charlie175
Subject: 190 Rams
Date Posted: 26 Apr 2017 at 7:32am

The RAMS on my 190xt (I think they are the 3" ones) are leaking.

How hard is it to replace the seals/wiper/o-ring in these?

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD

Replies:

Posted By: MACK
Date Posted: 26 Apr 2017 at 8:27am

Take them off, unscrew outer nut, then pull shaft and packing out. Use cylinder hone to polish the best you can. Unscrew bottom nut and remove old packing. Loosen outer nut to replace oring. Lotite outer nut, screwing it against oring. Put new packing on lower nut, using Lottie on threads and stew nuts tight togather. Use a lot of grease on packing to put back into barrel. Tighten outer nut and put back on. MACK

Posted By: Charlie175
Date Posted: 26 Apr 2017 at 10:18am

Thanks Mack!

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD