My 54S Speed Patrol Project - Model
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=137676
Printed Date: 15 Oct 2025 at 8:28pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: My 54S Speed Patrol Project - Model
Posted By: Armand(AZ)
Subject: My 54S Speed Patrol Project - Model
Date Posted: 23 Apr 2017 at 8:20am
|
I started this model a couple months ago and have it completed to this point. I took a lot of pictures and measurements of James Coons 42S which is the same, frame wise. It is pretty close to scale but in some areas, like the gear boxes, it is very difficult to get there. The lift gear boxes and the steering gear box work. I used brass slot car gears that I found on the web. I also added the tilt to the front axle but haven't built the gear box to make it work as yet. I had just fabbed the fenders when this photo was taken, so they are just sitting on the tire. There are at least 10 U joints, and they take me about an hour each to make. The project has been on hold the past few days as we move up to the mountains for the summer. But I have the shop moved and set up so will continue the build when I'm not fishing. Here's a couple pictures: http://s270.photobucket.com/user/ACmodels/media/012.jpg.html" rel="nofollow">  http://s270.photobucket.com/user/ACmodels/media/014.jpg.html" rel="nofollow"> 
|
Replies:
Posted By: Armand(AZ)
Date Posted: 23 Apr 2017 at 8:30am
|
This is a picture of James' 42S. http://s270.photobucket.com/user/ACmodels/media/Coons%20020%201600x1200.jpg.html" rel="nofollow"> 
|
Posted By: 45 turboa-
Date Posted: 23 Apr 2017 at 8:32am
|
Looks great you have a lot of talent !! ------------- turbocharged |
Posted By: ac45dave
Date Posted: 23 Apr 2017 at 8:33am
Every time one of these posts come up,I am in total amazement.you sir,have an amazing gift to be able to craft such creations. ------------- 54 wd-45gas ; 56 wd-45d N/F w/fact p/s ; 63 d-17 sIII N/F gas ; 60 D14 N/F ; 67 d-17 sIV N/F gas ; 63D15 sII W/F; 39rc#667 ; 2021 massey 4710 fwa ; gravely 2 wheel tractors |
Posted By: Tracy Martin TN
Date Posted: 23 Apr 2017 at 8:49am
|
Armand, amazing as always! What did you do before you retired? Tracy ------------- No greater gift than healthy grandkids! |
Posted By: macvette
Date Posted: 23 Apr 2017 at 9:49am
| Wow - Armand, I didn't think any one person could ever have the talent for this that you do. I always wait for your next project to show up on the forum. Totally amazing! |
Posted By: Calvin Schmidt
Date Posted: 23 Apr 2017 at 9:52am
|
Looking Great ! ------------- Nothing is impossible if it is properly financed |
Posted By: Armand(AZ)
Date Posted: 23 Apr 2017 at 10:04am
| Thanks guys!! Tracy, actually I pushed a desk around for the last 28 years of my working time. Retired in 2002. |
Posted By: V8cat359
Date Posted: 23 Apr 2017 at 12:26pm
| Great lookin model! And nice 42s. Wish mine looked that good! |
Posted By: shameless dude
Date Posted: 24 Apr 2017 at 3:00am
| another great project you've done Armand! thank you for posting this! |
Posted By: tadams(OH)
Date Posted: 24 Apr 2017 at 3:07pm
| Yes thank you for sharing your great work |
Posted By: Stan IL&TN
Date Posted: 24 Apr 2017 at 3:40pm
 ------------- 1957 WD45 dad's first AC 1968 one-seventy 1956 F40 Ferguson |