Farm Equipment - Fehr cab interiors co. for door seal

Print Page | Close Window

Fehr cab interiors co. for door seal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=137656
Printed Date: 19 May 2025 at 12:36pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Fehr cab interiors co. for door seal

Posted By: fourthgeneration
Subject: Fehr cab interiors co. for door seal
Date Posted: 22 Apr 2017 at 2:32pm

Does anyone have any experience with Fear Cab Interiors Co.? I need to replace the door seal/ weatherstripping on the left hand door of our 8070. Agco sells a roll of weather strip and tube of glue. This kit seams to be mitered to length. If so this would be a ton nicer to install.

Replies:

Posted By: Daehler
Date Posted: 22 Apr 2017 at 2:51pm

I installed one on my 8070, fit perfectly. Start at a top corner and work your way around. Fehr has self adhesive strip so just peel off the paper as you go around. Well worth the money and is just as close to oem as you can get. Just make sure old adhesive is cleanded off good. Mines has been on for 2 years and is still sticking excellent.

-------------
8070FWA,7080 BlackBelly, 7045,2 200s,D19,D17,G, WD,45,UC,7 AC mowers and lots more!
"IT TAKES 3 JD's TO OUT DO AN ALLIS, 2 TO MATCH IT IN THE FIELD AND 1 FOR PARTS!"

Posted By: fourthgeneration
Date Posted: 22 Apr 2017 at 2:57pm

Thanks for the reply. I stripped the tractor down to bare metal and primed and painted it. The original seals were all good so I glued them back except the left hand was tore up.