D15 SII aux hyd control
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=137629
Printed Date: 14 Oct 2025 at 2:35am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D15 SII aux hyd control
Posted By: Creek Jenkins
Subject: D15 SII aux hyd control
Date Posted: 21 Apr 2017 at 2:03pm
A friend of mine has a D15 SII with the aux hyd controls to the left of the seat. He bought the tractor last year and the valve on the right leaks oil constantly thru the hole in the back. Not sure if the hole is supposed to be plugged? One of the other two has a hole and doesn't leak. We took the valve apart and the o rings seem okay. Should we plug the hole? ------------- Have spacesuit, will travel |
Replies:
Posted By: Joe(TX)
Date Posted: 21 Apr 2017 at 4:26pm
|
I would replace the O-rings any time it is taken apart. There at 2 0-rings and a seal per the parts book. The plugs were only used to keep out the dirt ------------- 1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A |
Posted By: TimNearFortWorth
Date Posted: 22 Apr 2017 at 10:10am
|
Have seen them with "sintered brass" and some with a small rubber stopper to keep external debris from getting in. If leaking, 2nd the o-ring comment and had to have a cap fitting made for my D12 some years back as could not find a cap to match the OEM. Mine was badly pitted on the ID and unfortunately, the machinist that made my new cap passed away last year. He made it look exactly like the original, hex flats and all. You may get lucky and find a good one from a salvage yard . . . . |