1960s H3
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=137622
Printed Date: 08 Nov 2025 at 6:11pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 1960s H3
Posted By: Donaldson1
Subject: 1960s H3
Date Posted: 21 Apr 2017 at 8:50am
|
Hey guys and gals. I have a 1960s allis chalmers h3 loader crawler and the left drive sprocket bearings went out wondering if anyone can direct me to somewhere to get bearings and seals. Seems like ive looked all over the internet and cant find them and the numbers on the races are worn off. thank in advance
|
Replies:
Posted By: darrel in ND
Date Posted: 21 Apr 2017 at 9:18am
|
Hi Donaldson. Welcome to the Allis forum. You might try a place called "General Gear" in Idaho for your crawler parts. They also go by the name tractor parts, or something like that. Number is 208-342-8911. Hope this helps. Darrel
|
Posted By: Donaldson1
Date Posted: 21 Apr 2017 at 9:50am
|
Thanks darrel I'll look into them. It had timken bearings in it I just can't read the number on the race because it's so beat up I'm sure a auto parts store could match something up of I had the numbers
|
Posted By: Ages Cat
Date Posted: 21 Apr 2017 at 11:09am
The seal on the output shaft is a problem. Call MINPARR in Minneapolis. I had to redo ours because I simply used an aftermarket seal.
-------------
Curt Anderson
HD3, HD5B, HD6AG,HD6B dozer, I-400,615, 616,620,720,ACP25 lift truck, 1956 D Grader, AC 540 loader, AC #84 plow, Simplicity tractors, Agco MT225, Agco 2025,
|
|