Farm Equipment - Does anyone Have Pic of Narrow tired 80XX or 70xx

Print Page | Close Window

Does anyone Have Pic of Narrow tired 80XX or 70xx

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=137613
Printed Date: 08 Nov 2025 at 6:11pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Does anyone Have Pic of Narrow tired 80XX or 70xx

Posted By: Sagefarmer
Subject: Does anyone Have Pic of Narrow tired 80XX or 70xx
Date Posted: 20 Apr 2017 at 10:14pm

I use an 8070 for row crop cultivation in a specialty crop. I would like to know if AC sold any narrow tired tractors, like a 14.9 size. Can I find rims in salvage. Do I have to get them from Umferth (sp) Does anyone have pic of these narrow tires and rims on 8000 or 7000 series?

Replies:

Posted By: 7060
Date Posted: 20 Apr 2017 at 10:31pm

I have a set of 14.9-46 rear tires on a 7030. I put them on temporary to paint the tractor and used John Deere 10 bolt hubs that are 3 5/8" too. Makes it set up pretty tall and gives it a nice road speed, but there going to get replaced.

Posted By: Sagefarmer
Date Posted: 21 Apr 2017 at 5:53am

GM 7060, so the JD rims will fit the AC hub. I have a couple set of the tall narrow rims but did not check the center hub part. I just figured the AC rims would not match any of my JD stuff. Can u get a pic when u take it apart.

Posted By: Dakota Dave
Date Posted: 21 Apr 2017 at 7:23am

The rim bolt patterns are pretty standard. We use the same rims on our Case, John Deere and IH tractors as well as the sprayer. We run 14.9x46 on everything except the 4WD articulating tractors. you will need to duel the tractor up. the bare tractors are to heavy to run 14.9 singles. Tractors are all set for 20" rows, so the outside of the duals are pretty wide.

Posted By: matador
Date Posted: 21 Apr 2017 at 8:15am

Allis tractors are pretty rare out here, but a lot of older John Deeres have been converted like that for spraying. Those Unverferth "Step-Up" rims are very, very common here.

I think you'd need duals for the weight, but I don't know why you couldn't do it.

Posted By: Sagefarmer
Date Posted: 21 Apr 2017 at 8:26pm

Yeah, I wanted duals to help with weight of the 8 row rolling cultivator. We are on 38's but crop grows into the middles

Posted By: jiminnd
Date Posted: 21 Apr 2017 at 9:21pm

BIL has an 8070 with narrow tires, I think 14.9 by 46. I don.t have any pictures but he may.

-------------
1945 C, 1949 WF and WD, 1981 185, 1982 8030, unknown D14(nonrunner)