Print Page | Close Window

gas tank top repair

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=137290
Printed Date: 08 Nov 2025 at 7:45pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: gas tank top repair
Posted By: ac2020
Subject: gas tank top repair
Date Posted: 11 Apr 2017 at 8:10pm
seen on ebay replacement gas tank tops that you weld on has anyone tried these? was listed for wd and wc tractors



Replies:
Posted By: dawntreader74
Date Posted: 11 Apr 2017 at 10:20pm
you can cut one off a junk tank' an weld it on the good one' someone has a bad tank with a good top on it' bottom rusted out is what you need? parts tank;;


Posted By: corbinstein
Date Posted: 12 Apr 2017 at 6:27am
why would they sell a half-tank? 
And do they make tank bottoms?


Posted By: ac2020
Date Posted: 12 Apr 2017 at 8:06am
it is just the bung on the top of the tank
not the top half of the tank


Posted By: Ted J
Date Posted: 12 Apr 2017 at 11:24am
Are you just looking for a new neck for the tank??
$2.99 + S/H (VERY reasonable!!)
http://www.fillernecksupply.com/304-stainless-filler-neck-2-28-58mm-x-0-64-16mm-na1375ss304/" rel="nofollow - http://www.fillernecksupply.com/304-stainless-filler-neck-2-28-58mm-x-0-64-16mm-na1375ss304/
Also, they have a new cap also  $7.99 + S/H
http://www.fillernecksupply.com/vented-bayonet-cap-with-finger-grips-fits-2-28-od-necks/" rel="nofollow - http://www.fillernecksupply.com/vented-bayonet-cap-with-finger-grips-fits-2-28-od-necks/


Not an Allis cap, but it'll do.  Looks nice on my C


-------------
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17


Posted By: Ted J
Date Posted: 13 Apr 2017 at 11:34am
ac2020 did you see this?  Did it help?
It's the cheapest that I could find on the net.  A lot of place want a minimum order, they don't here.


-------------
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17


Posted By: 45 turboa-
Date Posted: 13 Apr 2017 at 5:04pm
I put a new one on my WD45 un soldered the old one the new one fit in the hole perfectly but I can't remember were I got it from.

-------------
turbocharged



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net