See MINNPAR supplies AGCO parts
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=137282
Printed Date: 08 Nov 2025 at 6:10pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: See MINNPAR supplies AGCO parts
Posted By: Coke-in-MN
Subject: See MINNPAR supplies AGCO parts
Date Posted: 11 Apr 2017 at 3:36pm
Was looking at MINNPAR site and see they say they supply AGCO parts also
http://www.agcofarmparts.com/" rel="nofollow - http://www.agcofarmparts.com/
-------------
Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel.
|
Replies:
Posted By: Lon(MN)
Date Posted: 11 Apr 2017 at 6:41pm
|
You can buy them but get your pocket book out.
|
Posted By: tbran
Date Posted: 11 Apr 2017 at 6:56pm
Minn-Par is a good organization - they do have some AC parts, due to them being the remnant of the old AC light industrial division. They have some parts sourced, and get some from Agco or Agco common sources for many parts. We usually check them as some times they have NOS pieces that have not taken price hikes in years. the rest of the parts are not cheap - but who is?
-------------
When told "it's not the money,it's the principle", remember, it's always the money..
|
Posted By: Joe(TX)
Date Posted: 11 Apr 2017 at 9:30pm
I've bought from them for several years. They must be getting parts from AGCO still because I have seen parts change from no stock to available.
-------------
1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A
|
Posted By: Allis dave
Date Posted: 12 Apr 2017 at 7:08am
|
I think that sometimes MinnPar supplies AGCO. I bought the relief valve spring for a D17 oil pump about a year ago. It wasn't in stock at the AGCO dealer so I opted for the fast shipping instead of the slow stock order. Spring came drop shipped from MinnPar.
|
Posted By: Joe(TX)
Date Posted: 13 Apr 2017 at 9:38pm
Minnpar shows if it is AGCO or aftermarket when you search the part number.
-------------
1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A
|
Posted By: Matt (Jordan,MN)
Date Posted: 13 Apr 2017 at 11:14pm
I have bought parts from Minnpar for several years. You use to be able to get AGCO parts At affordable prices. In the last 2 years Minparr has increased there prices to where it's not affordable anymore and in most cases costing more than if you go to your AGCO dealer. We recently put new front wheel bearings & spindle bushings in are D19. Minnpar has the spindle bushings at over $50.00 each. I asked the local Agco dealer and they had them in stock and at $22.00 each.
-------------
Owner of Matt Scott LLC
Specializing in NOS and used Allis Chalmers tractor & implement parts & liturature and Magneto Repair
http://www.mattscottllc.com/
|
|