Farm Equipment - Which Joystick

Print Page | Close Window

Which Joystick

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=137229
Printed Date: 08 Nov 2025 at 3:37pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Which Joystick

Posted By: TimZ(TX)
Subject: Which Joystick
Date Posted: 10 Apr 2017 at 12:00pm

Got the plumbing all figured out thanks to forum members, So I'm finally getting ready to order a joystick for the front end loader. Looking at Prince valves with power beyond. Would an 11 GPM work on a 185? I think the factory spool uses 10 GPM. Should I just get a 25 GPM for plenty of volume?

Tim

-------------
2-B's,CA,D15,D17,160,2-185's 8010

Replies:

Posted By: DrAllis
Date Posted: 10 Apr 2017 at 12:07pm

Open-Center with Power-Beyond. Figuring you wouldn't be using the loader at wide open throttle, I guess 11 GPM would work. But if the 25 GPM isn't very much more money???? it would be more than you need but....

Posted By: Joe(TX)
Date Posted: 10 Apr 2017 at 3:20pm

I would go with the higher flow. It will work with a 11 gpm but it will cause the oil to heat up. I saw this on my 190XT with a 16 gpm valve.

-------------
1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A

Posted By: TimZ(TX)
Date Posted: 11 Apr 2017 at 7:40am

Thanks. It's only a $40 dollar difference.

-------------
2-B's,CA,D15,D17,160,2-185's 8010