Farm Equipment - Starters again. 7020

Print Page | Close Window

Starters again. 7020

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=137069
Printed Date: 08 Nov 2025 at 3:37pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Starters again. 7020

Posted By: joe
Subject: Starters again. 7020
Date Posted: 05 Apr 2017 at 6:49pm

Posted below about replacing a Lucas starter on a 7020 with a Denso gear reduction starter. I found an genuine Denso starter that is listed as fitting a 6070, 6080 and 8010(on Denso's own website) for 381 from an actual Denso dealer, and 441 from another dealer that I trust(who says it's a genuine Denso) so I think that's the direction I'm going to go. Are the starters on the 6070, 6080, 7020 and 8010 factually identical? Will it bolt up to the tractor no problem? (other than maybe needing cable modifications)

Replies:

Posted By: Dans 7080
Date Posted: 05 Apr 2017 at 7:36pm

The 433 is the 4 cyl version of the 649.

-------------
When someone tells you Nothings Impossible, Tell them to slam a revolving door

Posted By: joe
Date Posted: 05 Apr 2017 at 7:52pm

I kinda figured that based on displacement. Thank you for confirming. So the bolt pattern is the same then?

Posted By: Lynn Marshall
Date Posted: 05 Apr 2017 at 8:18pm

Yes.

Posted By: Albert
Date Posted: 05 Apr 2017 at 9:13pm

We have used them for years with great luck. On some they like a socket head screw for one bolt.

Posted By: rw
Date Posted: 06 Apr 2017 at 2:54am

On the 190 xtd the length of one bolt had to be 'maanaged' because the hole was blind It was the top one on the outside - easy to see and easy to fix by adding washers under the head of the bolt. Really makes start nice