500 loader?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=136910
Printed Date: 08 Nov 2025 at 5:57pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 500 loader?
Posted By: dt1050
Subject: 500 loader?
Date Posted: 02 Apr 2017 at 6:40pm
     This was supposed to be the rest of the loader assembly for my d14. But when Ed showed up to haul the tractor he immediately noticed that they are two different loaders, sure wish I had that type of knowledge. He believes it's a model 500 (the one NOT on the tractor). The one on the tractor has a tag that says 5214? this last picture I have no idea what it's supposed to be, but it came with the tractor so, I figured what the heck. basically I need to know what I need to put the loader on the d14.  ------------- Just cause it's orange don't make it a tractor, there's only one..Allis Chalmers |
Replies:
Posted By: wfmurray
Date Posted: 02 Apr 2017 at 6:53pm
| Bottm picture looks like a lift to mount in rear of pickup. |
Posted By: DSeries4
Date Posted: 02 Apr 2017 at 7:33pm
|
A 500 loader will not fit on a D14
------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: Gary Burnett
Date Posted: 02 Apr 2017 at 8:03pm
|
Well you have some 500 loader parts to sell.What is the width center to center where the loader arms mount on the frame on your tractor? I have a loader front here off a D15 that might work,we can do some trading as I have a 500 loader on the gas 180. |
Posted By: Roger Mn
Date Posted: 02 Apr 2017 at 8:55pm
| that is a 445 loader |
Posted By: cottonpatch
Date Posted: 02 Apr 2017 at 10:51pm
X2 to above. Mounting brackets for a 500 loader are different. ------------- '52 CA, '61 D10 II, ‘61 D15, '66 D15II, '63 D17D III, ‘69 170, '73 185 Crop Hustler, '79 185, '79 7000, '77 7040 |
Roger Mn wrote:Posted By: dt1050
Date Posted: 03 Apr 2017 at 2:59am
it's amazing to me that a person can see a pile of metal and say it's a ?. that is some serious knowledge. thanks for the info. I'll measure the frame this morning after the sun comes up, gotta a nosey bear stretching out my barb wire fence already this year and I'm way to fat and gimped up to run so,,,,,.bear steaks maybe... ------------- Just cause it's orange don't make it a tractor, there's only one..Allis Chalmers |
Posted By: desertjoe
Date Posted: 03 Apr 2017 at 4:14am
|
Hey DT,,,,many years ago,,,my Uncle gave us what was left of a bear he had shot durin a bear hunt,,,and there was a lot left cause they ate on thet son of a buck till they couldn't no more,,,,, They was a whole bunch of us kids and not near enough food,,,so,,,,all that bear meat was some great,,,,,,,what I distinctly remember is that you had to cut off little bitty pieces of meat cause thet stuff would just grow and grow the longer you chewed on it,,,!!!!  ,,,,,little pieces,,,,quick chewin and fast swallow,,,,,,, |
Posted By: Roscoe62
Date Posted: 03 Apr 2017 at 4:29am
|
Granted they will be new and shiny. - Roscoe
|
Posted By: dt1050
Date Posted: 15 Apr 2017 at 4:16am
|
what ever model it is it seems to fit my d14. both sides of the loader frame are on (gotta drill some new mounting holes) the braces that go from one side to the other and the rear portion u bolted to the rear axle. The only thing we had to do is cut a piece of angle to bolt to the rear portion of the frame so the u bolt would go around the axle were there wasn't some sort of hump or bump in the way and make u bolts. next I'll be hooking a pump to the front and running it off the crank shaft pulley for live hydro's. I have a pump and fortunately the d14 has 2 holes in the front to mount a bracket. I've owned 5 tractors, only 1 had a loader installed when I bought it. after putting a loader on the 1st one I swore I'd never do it again!!! so why the .... am I doing this again!!! ------------- Just cause it's orange don't make it a tractor, there's only one..Allis Chalmers |
Posted By: Gary Burnett
Date Posted: 15 Apr 2017 at 5:25am
Its a D14 loader now! Good Job. |