Farm Equipment - 200 540/1000 pto

Print Page | Close Window

200 540/1000 pto

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=136602
Printed Date: 07 Jun 2025 at 12:14pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 200 540/1000 pto

Posted By: chuck (WI)
Subject: 200 540/1000 pto
Date Posted: 26 Mar 2017 at 9:20am

Have a 200 with 540 PTO only and wanted to switch to 540/1000 wondering what is needed to make the switch also will the 180/185/190 lift housings with 540/1000 work.

Replies:

Posted By: Bob J Wi
Date Posted: 26 Mar 2017 at 10:31am

On our 200 I was told by our AC club member Pres.
that all I have to do is take out the bolts around
the shaft and pull out the PTO and install the opposite
end into the hole and reinstall the bolts. I have never
done it, so I cannot say for sure.

Posted By: chuck (WI)
Date Posted: 26 Mar 2017 at 11:40am

Mine don't unbolt straight 540 from what I been told the gears are in the lift housing so just wondering if all I need is the lift housing and internal shaft or if there's gears up inside to.

Posted By: MACK
Date Posted: 26 Mar 2017 at 3:28pm

Gear in torque tube to change also. MACK