D10 II Alternator Brackets
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=136414
Printed Date: 08 Nov 2025 at 5:14am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D10 II Alternator Brackets
Posted By: farminharmon
Subject: D10 II Alternator Brackets
Date Posted: 20 Mar 2017 at 9:22am
|
What are you guys using for alternator brackets on a D10 series II? Anybody have any pictures? Thanks in advance. ------------- B110 CA D10II (2)D12III 5040 5050 6080 170 JD5205 Kubota M9000 Kubota M95S |
Replies:
Posted By: Steve in NJ
Date Posted: 20 Mar 2017 at 9:57am
|
We offer an Alternator brkt kit for the B,C,CA Tractors. With a little bit of a modification to just the upper bracket, it will fit D10-D14. Check out our website for a picture under "Alternator & Generator Mounting". Steve@B&B bb-customcircuits.com ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: DiyDave
Date Posted: 20 Mar 2017 at 5:45pm
Best adjustor bracket, I ever made was from a 327 corvette. Mostly, I just turn the genny bracket around backwards, and do some surgery to the bottom end of a 10SI alternator housing. That way iff'n anybody ever wants to make a trailer queen outta my field workers, the bracket is still there, with no mods to it...
|
farminharmon wrote:Posted By: Ranse
Date Posted: 20 Mar 2017 at 7:25pm
|
Don't do like I did, I kind of got taken behind the woodshed on mine. The alternator on my D10 was bad, so I called an alternator shop about fixing it. I also asked if they had any brackets that looked better than the home made one on it. He said sure he had some, might need a little modification. I said, "ok good", so I took it to him. Long story short, he didn't have a bracket, he built one, and charged me labor for it. I had no choice at that time but to pay him, but I wasn't happy. He did an ok job, but on closer inspection I noticed something familiar. He used part of my old bracket to make the new one. I suggest you build your own. I wish I had, it wouldn't be that difficult. The alternator bracket on my B came from Stieners, it's simple and works pretty well. I believe it could be used on the D10 as well.
|
Posted By: PaulB
Date Posted: 21 Mar 2017 at 2:30pm
|
This is what I've built and used. I've also sold quit a few. This will allow the large alternator to fit behind the drag link on C & CA tractors. 
------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |