AC 160 brake set lever
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=136083
Printed Date: 20 Sep 2025 at 6:48pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: AC 160 brake set lever
Posted By: Badger Russ
Subject: AC 160 brake set lever
Date Posted: 11 Mar 2017 at 6:44pm
| Regarding the brake lock lever. Anyone able to tell me where the rear of the spring attaches?? The front obviously hooks around the pin that goes thru the clevis at the bottom of the rod. The parts manual shows a "leg" that the spring hooks to. I wonder if the leg was held on by the bolts that mount the platform assembly? Any help would be appreciated. |
Replies:
Posted By: Dave (NE)
Date Posted: 11 Mar 2017 at 7:06pm
| boy, setting here at the computer, I can't tell you, but I'll try to take a look tomorrow. If I don't reply, get back to me, as it is old age etc. that may impede my response. |
Posted By: Badger Russ
Date Posted: 11 Mar 2017 at 7:09pm
| I hear that :) I can remember some obscure detail from when I was five, but don't ask. me what I had for lunch today! thanks, and I will look forward to your response. |
Posted By: Badger Russ
Date Posted: 12 Mar 2017 at 2:38pm
| Hi Dave did you get a chance to check the brake lever? |
Posted By: allisman55
Date Posted: 12 Mar 2017 at 2:53pm
|
|
Posted By: BrianC
Date Posted: 12 Mar 2017 at 2:55pm
| Yes, that leg (p/n 72073086) is secured by the lower bolt which mounts the foot board. |
Posted By: Dave (NE)
Date Posted: 13 Mar 2017 at 3:14pm
Well, Russ, sorry for the delay, but got caught up in family matters and then photobucket wouldn't cooperate (anyone else have problems with it?). Anyway, if this works, there will be a couple pictures that should help explain connections. 
|