Radiator foam kits for 7000 series
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=136061
Printed Date: 21 Sep 2025 at 4:12pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Radiator foam kits for 7000 series
Posted By: Lynn Marshall
Subject: Radiator foam kits for 7000 series
Date Posted: 10 Mar 2017 at 10:12pm
Questions have been asked about these pieces. I get mine from Hy-Capacity and I,m sure that the Agco kit is similar. Actually, Hy-Capacity may supply the kit to Agco. These kits service all of the 7000 series so there are some pieces that won't be used on every tractor. In the top picture the piece in the middle goes under the air intake tube, the long pieces on the side go onto the side of the radiator,they are cut to fit the contour of the radiator and the side supports, the top pieces in the picture are for the top of the radiator. There are two different top pieces,depending on what model of tractor you have. The thicker one is for the 7000-7010-7020. The second photo shows the rest of the kit. The pieces in the middle of the picture go in front of the bottom radiator tank. Only one is used. Select the one that is the proper length. Again,this piece goes between the radiator and the black plate that supports the air cleaner assembly. Oil cooler hoses also go up through this gap. The bottom pieces in the picture go onto the side of the air cleaner support plate. The foam blocks go into the lower front corners of the orange grille and the two small strips go between the radiator and the side support brackets. I use 3M weather strip adhesive.  
|
Replies:
Posted By: Unit3
Date Posted: 10 Mar 2017 at 10:46pm
|
I made some out of memory foam. It caught on fire under the hood of the 7080. That could have been a really, really bad day. I will be checking with HI-CAP for a kit. ------------- 2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C |
Posted By: dpower
Date Posted: 11 Mar 2017 at 12:13am
| Lynn do they have the kits for 8000 series??? |
Posted By: Lynn Marshall
Date Posted: 11 Mar 2017 at 7:20am
| No foam kits for the 8000 series that I know of. I am not that far from their facility. I should take them some of the 8000 pieces and see if they could duplicate them. |
Posted By: victoryallis
Date Posted: 11 Mar 2017 at 7:28am
|
Hadn't been that long ago I got a kit for my 8030. ------------- 8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760 |
Posted By: Lynn Marshall
Date Posted: 11 Mar 2017 at 9:22am
| Sorry, I should have said that an 8000 kit is not available from Hy Capacity. It is available from Agco. |
Posted By: dpower
Date Posted: 11 Mar 2017 at 1:36pm
| Ya I bought an 8010 one from Agco it was expensive |
Posted By: GM Guy
Date Posted: 03 Sep 2019 at 5:09pm
|
Has anyone tried this foam kit on a 7580? ------------- Gleaner: the properly engineered and built combine. If you need parts for your Gleaner, we are parting out A's through L2's, so we may be able to help. |