Farm Equipment - Adding Hydraulic Ports to AC 6060

Print Page | Close Window

Adding Hydraulic Ports to AC 6060

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=136003
Printed Date: 16 Sep 2025 at 7:29pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Adding Hydraulic Ports to AC 6060

Posted By: Tractor_Rookie
Subject: Adding Hydraulic Ports to AC 6060
Date Posted: 09 Mar 2017 at 8:36am

Hello all, I have an AC 6060 and I am wanting to add a loader that I have found an actual AC loader for the 6060, however I only have 2 hydraulic ports in the back of my tractor, how can I add 2 more so this loader will work correctly. Is there a 2 to 4 port conversion or do I add 2 more lines? if so how. any assistance will be great thank you.

Replies:

Posted By: victoryallis
Date Posted: 09 Mar 2017 at 11:59am

Someone offered a hydraulic outlet multipler at one time. Sad part is I can picture the add but can't think of the brand.

-------------
8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760

Posted By: DrAllis
Date Posted: 09 Mar 2017 at 12:20pm

Your best solution is to buy an open-center "joystick" hydraulic valve, set-up for power beyond. Then, the loader has a valve of its own and the outlets on the tractor are available for other things.